What is alloy C12200?
C12200 copper is a lightly alloyed grade of copper, formulated for primary forming into wrought products. CW024A is the EN numeric designation for this material. C12200 is the UNS number. The properties of C12200 copper include thirteen common variations.
What is DHP copper used for?
C12200 DHP Copper is very easy to work, used in a variety of industries from commercial and plumbing applications to industrial and heat transfer tubes. C12200 DHP Copper is also used in chiller applications where the tubes are finned or other surface enhancements are applied.
What is ASTM B152?
ASTM B152 is a Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar. For instance, the UNS C11000 is an electrolytic Tough Pitch, lightly alloyed grade of Copper. While grade UNS C10100 is referred to as Oxygen-Free Electronic or in short as OFE.
What is phosphorus deoxidized copper?
Phosphorus Deoxidised Tough Pitch Copper (Cu-DLP) is a general purpose tough pitch, phosphorus deoxidised copper, within which the residual phosphorus is maintained at a low level (0.005-0.013%) to achieve a good electrical conductivity. It has good thermal conductivity and excellent welding and soldering properties.
What is CU-DHP?
Cu-DHP is a phosphorus-deoxidized copper with a limited, high amount of residual Phosphorus. It has excellent welding properties and is resistant against hydrogen embrittlement. It can be deformed excellent, either hot or cold. Resistant to: industrial atmosphere (formation of dark resp.
What is ASTM B370 Copper?
Copper Sheet ASTM B370 is normally used for ornamental, furniture, and architectural applications. ASTM B370 copper is popular for its appearance and ease of working/machining. ASTM B370 is commonly referred to as other brand names or as Roofing Copper. It will develop a green patina with time.
What is the specification of copper plate?
Copper Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width; Copper Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width; Copper Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width.
What is deoxidized copper?
The deoxidation of copper alloys involves removing the oxygen using a chemical process, usually other metals. As the oxygen and other gases are removed from the metal, certain properties are either enhanced or decreased.
Is C110 the same as C11000?
C110 is basically pure copper with a 99.9% copper composition. C11000 ETP Copper can be bent, soldered, drilled, peened, rivited and formed. It is not a good machining metal with a machinability rating of 20. C110 also has a high thermal conductivity.