Is it cheaper to build a fence horizontal or vertical?
Horizontal fences tend to be more expensive than vertical fences because they require a higher grade of lumber for the fence boards to reduce the possibility of sagging.
What are the vertical boards on a fence called?
Picket – A vertical fence board or element that attaches to the rails. Pickets can be made from any material but are most commonly used in wood, aluminum, iron and vinyl fences, and are usually evenly spaced.
How much space do you need between vertical fence boards?
The fence boards alternate on the sides of the rails, overlapping by at least 1 inch on each side of the boards. Thus, 6-inch fence boards would be spaced approximately 3 1/2 inches apart, since the actual width of a 6-inch board is 5 1/2 inches.
Is board on board fence more expensive?
A board on board fence will cost more because the boards overlap by 1″ to 1 1/2″. You will need up to 30% more pickets for a board on board fence than a stockade style fence. If you plan to finish your fence you will need more supplies to cover the additional pickets.
Is it better to use screws or nails on a fence?
Screws do a better job at holding wood together, binding two boards more tightly than a nail. Screws also stay fixed in place for a lot longer too, while nails can loosen overtime. So, if you had to choose between the two, you should opt to secure a fence with screws.
How far apart should the posts be in a fence?
Determine Spacing for Fence Posts Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide. Mark the exact position where you’d like each post hole dug.
What is a Bob fence?
The second most common style of fence is known as the Board-on-Board (BOB) fence. Unlike a Side-by-Side fence, Board-on-Board (BOB) fence styles do not have any gaps between the pickets. The Board-on-Board (BOB) fence is primarily used as a more decorative style and is a very popular privacy type of fence.
Should fence boards be tight together?
For solid privacy fences, the fence boards can be butted tightly together or spaced 3/8 to 1/4 inch apart to allow for wood expansion and contraction during varying weather conditions.
What is a vertical board?
Vertical board fencing is a durable fence option that is stick built and well-suited for steep grades. Enhance the appearance with a cap board, lattice top, arch or dip. In addition, there are a variety of fence post and cap options available to further enhance the look of your fence.
How many boards are in a fence panel?
Measure the distance to be fenced and calculate the number of boards required. The number depends of the type of fencing. Typically oak board fencing is three or four boards per section. Increase the amount by 10 percent to allow for warped and split boards.
What is horizontal fencing?
A horizontal fence is where the fence boards run horizontally instead of the traditional vertical way. They are becoming more popular and is a popular choice for a modern, unique style areas.
What is board fencing?
board fence. A fence constructed of boards that are spaced horizontally and fastened to square lumber posts; widely used in the past, but now usually found only in upscale rural communities because of its relatively high cost.