How do I setup my O2 Boostbox?

How do I setup my O2 Boostbox?

Step 1: Plug one end of the yellow cable into your Boostbox and the other into any Ethernet socket on your broadband router. Step 2: Plug your Boostbox into the mains. The light will turn on. Step 3: Your Boostbox will now automatically set up.

How do I reset my O2 Boostbox?

To Factory reset:

1. Turn the power off.
2. Push a pin into the Reset hole and hold it there.
3. Keep pressing the Reset button while you turn the power on again, and keep holding the Reset button for at least 10 seconds.
4. The Boostbox may take up to an hour to start working.

How does a boost box work?

It works as a signal booster and connects to your broadband to give you a 3G signal. You’ll need a 3G or 4G phone to use a Boostbox. Only O2 phone numbers can use the Boostbox. Each Boostbox can have up to 32 different numbers registered to it.

How can I improve my O2 signal?

How to Solve O2 Signal Problem

1. Restart your device. Sometimes the simplest ways do the trick.
2. Ensure that your device isn’t in Power saving mode. You can check this by going to Apps> Settings > Battery.
3. Clear obstructions wherever possible. You can’t do much about trees or hills making an obstruction.
4. Fix sim errors.

Why is 02 signal so bad?

Your signal might be worse if your battery is low, or if you’re due a software update. You won’t be able to get signal if your account has been suspended. The closer to a mast you are, the stronger your signal will be. Things like trees and hills will also play a part.

Why is O2 service so bad?

Why is O2 4G so slow?

When your internet connection appears to be slow, you may have configured the wrong settings, or you are in an area with poor (3G/ 4G) coverage. Try closing background applications that might consume a lot of mobile data.

Is O2 a good network?

Still, it isn’t the most expensive network out there. But, if you’re after the latest iPhone or Samsung phone, you’ll probably find more for your money elsewhere. All in all, though, O2 is a great mobile network who offer loads of great packages, plenty of extra perks and benefits and competitive customer service.

How do I activate my new O2 SIM?

You can activate your sim in five simple steps:

1. Pop out the right size sim for your device, put it in and switch it on.
2. Visit the Pay As You Go mobile broadband page.
3. Enter your mobile broadband number and click sign in.
4. Follow the instructions to register and activate your data.
5. You’re ready to go.

How do you set up a cell phone booster?

Step 1: Select an indoor location near to a power outlet on a wall. Step 2: Mount the booster with the screws included as shown in your user guide or installation manual. Step 3: Connect outdoor antenna cables to booster connector marked “outdoor”. Tighten the connection with hand or wrench if necessary.

Do you have to connect to a cell phone booster?

No need to do anything. It just works. A cell phone signal booster is completely transparent. It works with existing cell signal, boosting from the tower to your phone and back again.

How to set up a boostbox on O2?

O2 ODM03– Gizzi 3mm 01 07 11 105x105mm 100% IN PRODUCTION9807 QSG Guide 105×105 Ent Step 1:Plug one end of the yellow cable into your Boostbox and the other into any Ethernet socket on your broadband router. Step 2:Plug your Boostbox into the mains. The light will turn on. Step 3:Your Boostbox will now automatically set up.

How long does it take to set up boostbox?

Plug your Boostbox into the mains. The light will turn on. Your Boostbox will now automatically set itself up – it usually takes about 40 minutes, but occasionally it can take up to four hours. After a few minutes the light will begin to pulse to tell you that setup is happening, you don’t need to do anything, just wait for it to finish.

What to do if your boostbox is not working?

If the power light is flashing and the ‘using your mobile’ light is yellow – check the cable is correctly connected between your router and Boostbox. Make sure you are plugged into the yellow port on the Boostbox. If something else is happening, don’t worry just give us a call on 202 from an O2 mobile or 03448090202 from a landline.

Where do I plug my boostbox into my router?

Plug one end of the yellow cable into your Boostbox and the other into any LAN port on your broadband router (they are usually yellow just like. the cable). Plug your Boostbox into the mains. The light will turn on.