Are Billy Goat Mowers any good?
Very dependable and works extremely well. You may have a problem if you are not in good physical shape. I mowed for about 4 hours and the Billy Goat never gave up and took everything I put in front of it. It made a great clean cut of grass, brush and saplings.
What does a billy goat brush cutter do?
The BC26 Series Outback, designed for cutting tough overgrown brush, is ideal for cleaning meadows and fields or cutting paths and trails – wherever dense brush and weeds present a cleanup challenge.
Is Billy Goat brush hog self propelled?
BILLY GOAT Brush Cutter, 26 in Cutting Width, 390 cc, Self-Propelled Drive Type – 5NLJ8|BC2601HM – Grainger.
What type of oil does a billy goat brush cutter take?
GL-3 is the most common gear oil used in Billy Goat equipment.
How much should I charge for bush hogging?
I’d say that $20/hr for the operator and $30/hour for the bush-hog was about right. I would go up $10/hr for fuel over $1.50/gallon, plus your travel cost, etc. It all goes up.
What can you cut with a walk behind brush cutter?
A brush cutter, also known as a brush hog or rough cut mower, is the most effective way to remove tall grass, dense weeds, and overgrowth from your property. A walk-behind brush cutter is designed to cut saplings up to several inches in diameter and grass up to eight feet tall.
How heavy is a billy goat brush cutter?
366 lbs
Specifications For Model # BC2600HH
| Engine: | 388 cc Honda (BC2600HM); 344 cc Briggs (BC2600ICM) |
|---|---|
| Cut Width: | 26” |
| Cut Height: | 3.75″ |
| Weight: | 366 lbs |
| Length: | 81.5″ |
How do you change the oil on a billy goat vacuum?
To change the oil, remove the bolt at the base of the engine just to the left of the filler neck and let the used oil flow collect into a container for recycling. Add new oil until it reaches the top of the neck. Billy Goat aerators have a reduction gear built into the side of the engine.