How do I setup my GE smart switch?

How do I setup my GE smart switch?

1. Launch the C by GE app on your phone or tablet.
2. Tap Add in the top right corner.
3. Then tap Add New Devices.
4. Select C-Start Switches.
5. Tap Get Started.
6. Tap Continue when you see that light.
7. Select the smart switch from the list. Select Continue to proceed.
8. Select your WiFi network from the list and tap Continue.

How does a remote wireless light switch work?

The device is installed into the canopy of the light fixture. Then, the wireless switch is attached to the wall. With just a simple push of a button, the switch sends the wireless signal up to this antenna to turn on or off the light.

Do GE smart switches require a hub?

Unlike the Caséta products, though, GE’s new switches and dimmers do not require a hub and can connect directly to a Wi-Fi network. They can work directly with Amazon’s Alexa or the Google Assistant voice assistants.

How do I reset my GE smart wall switch?

1 Reset Smart Switch Press and hold your switch’s button, toggle, or paddle for 10 seconds. If the reset is successful, the indicator light will begin blinking blue meaning the switch is ready to be set up again.

How do I move a light switch to the wall?

1. Turn off power from the breaker.
2. Take a picture of the wirings.
3. Remove Switch Plate.
4. Trace the electrical wiring on the wall that connects your light switch.
5. Unscrew The Switch and Wires.
6. Remove The Box.
7. Cut a Hole on Your Preferred Switch Location.
8. Put The Box and Screw The Switch To The Wires.

Why do some smart switches need a hub?

Most smart switch companies have white and black options which limit your ability to fine-tune your home decor. These smart switches use an updated Z-wave connection. This means that you will need a dedicated Z-wave hub if you want to use them in your smart home.

What Hub works with GE smart switch?

Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required; Alexa device and hub sold separately).

How do you connect a smart light switch without a neutral wire?

If you want to use smart switches and don’t have a neutral wire in your switch box, you can hire an electrician to run a neutral wire between the light fixture and the switch. You can also have an electrician rewire the switch and light fixture, which is potentially more expensive.

How do I factory reset my GE light switch C?

1 Reset Smart Bulb

1. Launch the C by GE app on your phone or tablet.
2. Tap Settings at the bottom.
3. Tap Support.
4. Tap Factory Reset.
5. Then tap C by GE Lights.
6. The C by GE app will show you the number of times you have to turn on and off the smart bulb and the amount of seconds you have to keep the smart bulb turned on or off.

Why won’t my C by GE lights connect?

Reset C by Ge Sometimes resetting the smart bulb can also help you get around this error. To do so, you need to just turn the bulb on for 8 seconds and off for 2 seconds. Repeat this procedure around 5 times until you start noticing the bulb is flashing. This indicates that the device has successfully reset.

Is there a remote control for a wall switch?

With remote operation up to 100 feet away, the GE Wireless Wall Switch Lighting Control remote allows you to control any light with the touch of a button. The wall switch is easily installed with the included mounting bracket, and the remote includes a 12V A23 battery to get it started.

What does C by GE smart switch do?

Add any two Cync or C by GE Smart Switches and group them in the app for 3-way control of any large space. Smart switches and remotes give you instant control of smart bulbs and traditional bulbs without a hub. This opens in a new window.

What kind of lights can a GE light control receiver work with?

The lighting control receiver is compatible with LED, CFL and incandescent bulbs. Plug in any lighting device with these bulbs. With wireless lighting, you can automatically turn on your lights with a convenient switch. Automate your lighting at home with easy-to-control operations, conserving time and energy.

How can I control a GE lamp remotely?

Open the battery compartment or the transmitter and remove the battery saver insert. You can now control your device remotely using the remote transmitter. A light on the receiver turns on when the unit is activated remotely, indicating that power is being supplied to the lamp or device.