Is a John Deere 5425 a good tractor?
The John Deere 5425 is a high-quality, cost-efficient (81 engine hp) tractor that is ready to work on the operator’s time and in their conditions, while providing comfort and efficiency.
How much does a John Deere 5425 weigh?
John Deere 5425
| Dimensions & Tires | |
|---|---|
| Wheelbase: | 85.7 inches 217 cm |
| Weight: | 5775 to 7385 pounds |
| Front tire: | 7.50-16 |
| Rear tire: | 16.9-30 |
How much oil does a 5425 John Deere hold?
John Deere 5425 Engine
| Engine Oil | |
|---|---|
| Oil capacity: | 9 qts 8.5 L |
How many horsepower is a John Deere 5525?
John Deere 5525
| John Deere 5525 Power | |
|---|---|
| Engine (gross): | 91 hp 67.9 kW |
| PTO (claimed): | 75 hp 55.9 kW |
| PTO (tested): | 77.96 hp 58.1 kW |
| power test details … |
How much does a John Deere 5075e tractor weigh?
John Deere 5075E
| Dimensions & Tires | |
|---|---|
| Wheelbase: | 80.7 inches 204 cm |
| Weight: | 4634 to 7275 pounds |
| Front tire: | 7.5-16 |
| 2WD Rear tire: | 16.9-28 |
How many quarts of oil does a John Deere tractor take?
Oil catch pan or other container to drain old oil into (bucket, large coffee can, etc.); typical John Deere mowers hold two quarts of oil.
How many horsepower is a 5510 John Deere tractor?
John Deere 5510
| John Deere 5510 Power | |
|---|---|
| Engine: | 89 hp 66.4 kW |
| PTO (claimed): | 75 hp 55.9 kW |
| PTO (tested): | 82.24 hp 61.3 kW |
| power test details … |
How many horsepower is a John Deere 5200?
John Deere 5200
| John Deere 5200 Power | |
|---|---|
| Engine (gross): | 45.6 hp 34.0 kW |
| PTO (claimed): | 40 hp 29.8 kW |
| Drawbar (tested): | 35.74 hp 26.7 kW |
| PTO (tested): | 41.90 hp 31.2 kW |
How much can a John Deere 5075E lift?
With a rear hitch lift capacity of nearly 3,200 pounds, lifting and transporting those heavier implements – like rotary tillers and heavy seeders – are not an issue. Around the front, add a John Deere loader for up to 3,548 pounds lift capacity.
How fast does a John Deere 5075E go?
It comes standard with shiftable 540/540 Economy power take-off (PTO) and electronically activated, telescoping draft links….Speed chart.
| Gear | Total ratio | Speed |
|---|---|---|
| C1 | 40.541 | 13.47 km/h (8.37 mph) |
| C2 | 29.94 | 18.25 km/h (11.34 mph) |
| C3 | 22.151 | 24.66 km/h (15.32 mph) |
| C4 | 16.691 | 32.73 km/h (20.34 mph) |
Can you use motor oil in a hydrostatic transmission?
The fluid recommended for Hydro-Gear transmissions and pumps is a 20W-50 motor oil or 15W-50 synthetic motor oil. If the machine has oil reservoirs, they are mounted to the frame behind the seat, for easy access and oil level check accessibility.