What size rims fit a Toyota Tundra?
OEM Tire Sizes – Toyota Tundra
| Model Year | Original Factory Tundra Tire Sizes Sorted By Rim Size | |
|---|---|---|
| 2000-2006 | 245/70 R16 | 265/65 R17 |
| 2007-2013 | 285/70 R17 | 275/65 R18 |
| 2014-2021 | 285/70 R17 | 275/65 R18 |
What size tires will fit my Toyota Tundra?
So, What is the Biggest Tire You Can Put on a Stock Toyota Tundra? The biggest tires you can put on a stock Toyota Tundra without a lift kit is 275/70 R16 on 16-inch rims on the first generation of the Tundra. On 17-inch rims, you can fit 265/70 R17 or 275/65 R17.
Can you put 33 inch tires on a stock tundra?
In short yes, you can fit 33’s on stock trucks. 275/70/18 is a little over 33″ and fits perfectly stock.
Will Landcruiser wheels fit a tundra?
Yes. I’ve been running ’07+ Tundra wheels (18″) since last summer; same backspacing and width (8″). I like them alot…
Will 35 inch tires fit Toyota Tundra?
YES! You absolutely can fit 35’s, as mentioned previously, 35’s are possible. If your intention is to run 35’s on the factory stock rims, then you can fit a 285/75R18 which equates to a (35″) tire on the OE 18×8″ wheels. Again, you might need minor plastic trimming with a more aggressive tire tread pattern.
Who makes a 305 60R20?
Goodyear Wrangler Silent Armor | 305/60R20 | Mavis Discount Tire.
What offset are stock Tundra wheels?
If your Tundra is a first-generation (2000 – 2006), then you have a 6 lug 5.5 inch or 139.7mm Medium Offset. If you have a second or third-generation (2007 – present), you have a 5 lug 150mm High Positive Offset.
How big are the wheels on a Toyota Tundra?
TUNDRA STOCK WHEELS: 2003-2006: 16″ wheels – Width: 7″, Offset: +15mm, Backspacing: 4.5″, Hub Bore Diameter = 106mm 17″ wheels – Width: 7.5″, Offset: +18mm, Backspacing: 5″, Hub Bore Diameter = 106mm
What kind of tires do you put on a tundra?
Official Tundra Wheel and Tire Setups – Pics and Info 1 Pro-Comp 2.5″ front leveling shocks. 2 KMC Skitch 20X8.5, +35 offset. 3 General Grabber HTS 275/60/20 (33X10.50).
Where is the negative offset on a tundra wheel?
Negative offset – When the mounting surface is closer to the disk/drum (Inside) of the wheel. Or the mounting pad is behind the centerline of the wheel. This type of wheel is commonly referred to as a deep-dish wheel.
Where is the safety bead on a Toyota Tundra?
Rim flange – The outermost edge of the wheel’s rim that the clip-on weights attach to on most wheels. Safety bead – The raised area circling the rim of the wheel and located slightly inward from the bead seat.
What is the bolt pattern on a 2010 Toyota Tundra?
5 Lug Toyota Tundra Wheels – 2007 & Newer – 5×150 Bolt Pattern.
Can I put bigger tires on my tundra?
Tundras have a large wheel well space. This way, you can fit bigger tires without modifications and expect no rubbing. However, if you go too big, the tire will rub against the fender. Trucks with bigger tires are more prone to rubbing when you drive on rugged terrain or when you drive over a bump.
Will 285 55r20 fit Stock tundra?
#12 285/55/20 is slightly smaller than 285/65/18, which is not that much larger than stock tires (less than 1/2 inch taller, I think). You should not have difficulty fitting that to stock Tundras. Even with 25 mm offset wheels, it shouldn’t be an issue.
Can you fit 35 tires on a tundra?
What size rims are on a 2010 Toyota Tundra?
Toyota Tundra 2010 4.6
| Tire | Rim | |
|---|---|---|
| 255/70R18 112T | 8Jx18 ET60 | 2.1 / 2.3 |
| 285/70R17 121R | 8Jx17 ET50 | 3.5 |
| 275/65R18 114T | 8Jx18 ET60 | 2.1 / 2.3 |
| 275/55R20 111H | 8Jx20 ET60 | 2.1 / 2.3 |
Is 5×5 the same as 5×150?
No. In the phrase “5×5,” the first “5” refers to the number of wheel studs that your wheel mounts onto. For the Jeep, it is 5.
Will 285 55 r20 fit Stock Tundra?
chphilo Tundra addict. 285/55/20 is slightly smaller than 285/65/18, which is not that much larger than stock tires (less than 1/2 inch taller, I think). You should not have difficulty fitting that to stock Tundras. Even with 25 mm offset wheels, it shouldn’t be an issue.
Can I fit 35s on a stock Tundra?
Can You Fit 35s on a Stock Tundra? YES! You absolutely can fit 35’s, as mentioned previously, 35’s are possible. If your intention is to run 35’s on the factory stock rims, then you can fit a 285/75R18 which equates to a (35″) tire on the OE 18×8″ wheels.