How do I know what treadle sewing machine I have?

How do I know what treadle sewing machine I have?

How to Identify Your Treadle Sewing Machine

1. Start by Finding the Brand. Most sewing machine manufacturers placed their brand name somewhere on the machine and/or the stand.
2. Look for Model Numbers and Other Identifiers.
3. Find Clues About the Date.
4. Look for Similar Machines.

How do I find out how old my Singer treadle sewing machine is?

So, how old is my Singer sewing machine? To identify when a model was made, you need to first find the Singer sewing machine serial number. The number can be found near the on/off switch on newer machines, and on the front panel or on a small plate on older machines.

How do I find the model number of my Singer sewing machine?

For sewing machines manufactured since about 1990, look for the model number on the handwheel side of the machine near the on/off switch or the electric cord receptacle. You will find the model number on the front panel of machines manufactured in the 1970s and 1980s.

What does treadle powered mean?

A treadle is operated by pressing down on its pedal with one or both feet, causing a rocking motion. This movement can then be stored as rotational motion via a crankshaft driving a flywheel.

Where is the serial number on a Singer treadle sewing machine?

According to Singer, serial numbers are located as follows: On the throat plate or bed of the machine – for treadle/hand crank machines. On the right hand side of the machine – for treadle/electric machines. Underneath the machine – for electric machines.

How do you thread a treadle sewing machine?

Put the spool of thread on the spool pin (1, Fig. 5). Pass the end of the thread into the thread guide (2, Fig. 5) at the left and near the top of the arm, then up into the lower eyelet (3, Fig. 6) of the bobbin winder thread guide, into the notch (4, Fig. 6) and pass the thread through the slot in the left side of the bobbin from the inside.

How do you take bobbin out of treadle sewing machine?

Draw to the left the slide in the bed of the machine Reach down with the thumb and forefinger of the left hand, open the bobbin case latch (2, Fig. 4) and lift out the bobbin case. While the latch remains open, the bobbin is retained in the bobbin case. Release the latch, turn the open end of the bobbin case downward and the bobbin will drop out.

How to raise balance wheel on Singer treadle sewing machine?

Turn the balance wheel over tow toward you until the thread take-up lever (5) is raised to its highest point.

Where can I find a sewing machine instruction manual?

At Sewing Parts Online, we pride ourselves in housing the largest selection of replacement sewing machine instruction manuals and service manuals available. In addition, we carry a vast collection of serger / overlocker replacement manuals and repair manuals.