Is 1000BASE-LX Multimode?
1000BASE-LX can run over both single mode fiber and multimode fiber with a distance of up to 5 km and 550 m, respectively.
Is LX Multimode?
1000BASE-LX can run over both single mode fiber and multimode fiber with a distance of up to 10 km and 550 m, respectively.
What is Cisco GBIC module?
The industry-standard Cisco Gigabit Interface Converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network.
What does 1000BASE LH mean?
LH means longer distance. 1000BASE-LH also refers to Gigabit Ethernet transmission. The wavelength of 1000BASE-LH SFP is 1310 microns, and the transmission distance is between 25 km and 70 km. However, 1000BASE-LH is only a term widely used by many suppliers.
What does Gbic stand for?
gigabit interface converter
A gigabit interface converter (GBIC) is a standard for transceivers, first defined in 1995 and commonly used with Gigabit Ethernet and fibre channel for some time.
What is SFP module Cisco?
Cisco SFP Modules, the industry-standard Cisco Small Form-Factor Pluggable Gigabit Interface Converter, links your switches and routers to the network. It interfaces a network device motherboard (for a switch, router, media converter or similar device) to a fiber optic or copper networking cable.
Is the Cisco 100m / 1G 10km SFP interoperable with IEEE 100base-lx?
The dual-rate 100M/1G 10Km SFP is interoperable with the IEEE 100BASE-LX and 1000BASE-LX/LH standards. The GLC-GE-DR-LX SFP also supports Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA).
Can a GLC-GE-Dr-LX SFP interoperate with other 100m SFPs?
The GLC-GE-DR-LX SFP can interoperate with other 100M SFPs/interfaces as long as those are based on 100BASE-LX10 standard. A 5dB attenuator is needed on the path of dual-rate SFP Tx and 100BASE-LX10 interface Rx. No attenuator is needed on the other fiber strand.
Is the Cisco 1000base LX compatible with IEEE 802.3z?
The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable.
What kind of cabling does Cisco 1000BASE-T SFP use?
1000BASE-T SFP for copper networks The 1000BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100 m (328 ft). Cisco 1000BASE-T SFP modules support 10/100/1000 auto negotiation and Auto