How do I connect my Insignia portable DVD player to my TV?

How do I connect my Insignia portable DVD player to my TV?

CONNECTING TO A TV OR MONITOR

1. Plug the (included) AV adapter cable into the AV OUT jack on your DVD player.
2. Plug an AV cable (not included) into the other end of the AV adapter cable.
3. Plug the other end of the AV cable into the AV jacks on the TV or monitor, making sure to.
4. Turn your TV or monitor on.

Why is my Insignia DVD player not working?

A major cause of operating problems with an Insignia DVD player is a dirty laser lens. You should also try a different DVD to make sure the dirt problem isn’t with the disc itself. Clean DVDs by rubbing gently with a clean, lint-free cloth.

How do I charge my insignia portable DVD player?

1. To connect to AC power:
2. 1 Plug one end of the AC power adapter into the DC IN jack on the side of your player.
3. 2 Plug the other end of the adapter into an AC wall outlet.
4. 3 Plug the other end of the adapter into a 12V vehicle power outlet or vehicle cigarette.

How do you fix my DVD player it says no disc?

Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.

How do I reset my Insignia Blu Ray player?

Press the left arrow button and navigate to Setup. On Setup, use the down arrow button and go to Resetting. Press the Enter button. Under Resetting, select either Reset to Factory Default Settings or Initialize Personal Information.

How do you fix a DVD player that won’t eject?

Follow the steps below to troubleshoot this issue:

1. Make sure the child lock feature is disabled.
2. Try to open the disc tray.
3. If the issue still occurs, power off your DVD player.
4. Unplug the power cord for 30 seconds and then plug it back in.
5. Power on your device.
6. Try to open the disc tray.