What is a LAN to LAN VPN?

What is a LAN to LAN VPN?

LAN-to-LAN VPN provides a secure and encrypted network connection for business transactions conducted between users and systems on one LAN to users, systems, and applications located on another LAN.

How do I connect two DrayTek routers?

IPsec Tunnel between two DrayTek Routers using the same IP subnet

1. Select only IPsec Tunnel for Allowed Dial-in Type.
2. Select Specify Remote VPN Gateway then input some strings for Peer ID.
3. Click IKE Pre-Shared Key then input the Pre-Shared Key.

What is dial out VPN?

Dial-Out: Initiates the VPN connection and can be thought of as the client side of the VPN connection. Both: This requires configuring the Dial-In and Dial-Out settings of a VPN profile on both routers, this allows either side to initiate the VPN connection.

How do I know if IPSec is working?

There are three tests you can use to determine whether your IPSec is working correctly:

1. Test your IPSec tunnel.
2. Enable auditing for logon events and object access.
3. Check the IP security monitor.

What is crypto IPSec transform set?

The Crypto IPSec Transform Set Configuration Mode is used to configure properties for system transform sets. Transform Sets are used to define IPSec security associations (SAs). IPSec SAs specify the IPSec protocols to use to protect packets.

Can VPN connect to LAN?

They can be used on any type of Internet connection, be it Ethernet or wireless. However, not all VPNs can provide you with the same level of privacy protection. If you want to find a great VPN for your Ethernet connection, check out our top picks.

How do I connect to a LAN remotely?

How to Connect Remotely to a Network

1. Click the Start button and type the word Remote. Then click the Remote Desktop Connection icon.
2. Enter the name of the computer you want to connect to.
3. Click the Connect button.
4. Enter your username and password, and then click OK.
5. Use the remote computer!

How do I enable LAN 2 on DrayTek?

At the page of LAN >> General Setup, check the “Enable” box of LAN2 and LAN3. Then click OK to save the configuration and reboot the router.

How do I connect to DrayTek VPN?

SSL VPN Setup on Windows

1. Enter Profile Name.
2. Select “SSL VPN Tunnel” in Type.
3. Enter Vigor Router’s WAN IP in IP or Hostname.
4. Enter User Name and Password.
5. Enable Fast SSL.
6. Click OK.

What is DrayTek VPN matcher?

DrayTek VPN Matcher is a cloud service included in selected DrayTek VPN routers. DrayTek VPN Matcher is the solution for business with the need for VPN connections in where getting a public IP address is not possible.

What is Qm_idle?

QM_IDLE state means to me this tunnel is UP and the IKE SA key exchange was successfull, but is idle, it remains authenticated in a (QM) quiescent state but active. Have a look at this two links to learn all about Ipsec and those commands.

How to configure a LAN to Lan VPN?

Go to [VPN and Remote Access] > [LAN to LAN] and select the first un-used profile. On that page, configure the 1. Common Settings: It needs to be Enabled, configured as a Dial-In connection and the Idle Timeout should be set to 0 seconds, so that it does not disconnect when idle.

How to make LAN port 4 a WAN 2?

Go to WAN >> General Setup configuration menu. Select WAN2. You will notice the message on this page it states that when WAN2 is activated, LAN port 4 will become WAN 2. Enable WAN2 and select the Physical Type if required to match the device it will be connected to. Click OK to save.

Can a dial-up Lan connect to an AO Lan?

Also, if one LAN is AO but the other is dial-up, then the dial-up LAN will always be able to initiate the connection to the AO LAN, but the AO LAN will need the dial-up LAN to be already online (connected to the Internet) to start the tunnel.

How does a DrayTek LAN to Lan VPN work?

An SSL VPN connection allows two or more DrayTek routers that support SSL VPN LAN to LAN to communicate using SSL / TLS security which by default uses TCP port 443. This provides normal LAN to LAN connectivity with routing between the two networks so that access between the two networks operates in the same way as if they were connected locally.