How do I program my Radio Shack Pro scanner?

How do I program my Radio Shack Pro scanner?

Press the “Program” button, then “Limit.” “LO” will appear on the screen. Enter the low frequency where you want to begin searching. Press the “WX/E” button and “HI” will appear on the screen. Enter the highest frequency you want to search to and press “WX/E” again.

How do I reset my RadioShack 95 scanner?

To Reset the scanner, turn off the scanner then turn it back on. Insert a pointed object, such as a straightened paper clip, into the reset opening above and to the right of the power jack on the side of the scanner. Then gently press and release the reset button inside the opening.

What is a dual trunking scanner?

From The RadioReference Wiki The Pro 95 is a dual trunking handheld scanner designed by GRE and sold by Radio Shack. It features the ability to track both conventional and trunked radio systems at the same time. It will follow Motorola type I and II systems, as well as EDACS trunked radio systems.

How do I reset my Radio Shack scanner?

If you need to clear your scanner, turn it off, press and hold down the number 2 and number 9 keys, while holding them down turn the scanner back on, “clear” should start flashing on the screen, once “clear” stops flashing you can enter the frequencies.

How do I program my radio shack?

Step 1: Locate the “squelch” knob placed beside the volume control and turn it until the static stops. Step 2: To program a channel, let’s say “channel 1”, select the manual option and pick the channel number you want. In this case, that’s “1”. Then, you click on manual again, and that takes you to channel 1.

How do you program a hand held scanner?

To program your handheld scanner, you will use the “Manual,” “Scan” and “Enter” buttons, and the keypad. Press the “Manual” button on the scanner. Then press a channel number on the keypad and press “Manual” again. For instance, if you want channel 16, press “1” and “6,” then “Manual.”

How do you use the radio Shack dual trunking scanner?

Turn on the scanner by turning the volume knob clockwise. The screen will display the message, “Welcome to Dual Trunking.” Turn the “Squelch” knob clockwise until the indicator is pointed to “Min.” Slowly turn the dial counterclockwise until there is no background noise.

How do I reset my Radio Shack Pro 197 scanner?

Member

1. Turn off the scanner, then turn it on again. The scanner briefly displays the DSP boot version, and then the.
2. Press 0 while the scanner is displaying the Welcome/Owner. screen.
3. Press 1.
4. Press ENT.
5. Press any key on the keypad to proceed.
6. Press any key on the keypad to proceed. The scanner will reboot.

How do I program a Radio Shack weather alert?

Programming the Scanner. Press Menu/Select and the up or down keys to reach the Location option and then press the Menu/Select button again. Select a warning option by using the up or down keys. “All” will receive all sent alerts regardless of location.

How do you program a realistic scanner?

How to Program a Realistic Scanner

1. Install fully charged batteries.
2. Press the button marked “Manual” on the scanner keypad.
3. Use the keypad to enter the channel number you want to program and press “Manual” again.
4. Press the “./Clear” button to clear the screen and prepare for the new frequency.