What is Loctite 567 for?
LOCTITE 567 is an off-white, UL approved, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”. LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant.
Does Loctite 567 Harden?
5. Properly tightened fittings will seal instantly to moderate pressures. For maximum pressure resistance and solvent resistance allow the product to cure a minimum of 24 hours.
Can Loctite 567 be used on potable water?
For easier disassembly or large diameter fittings, use Loctite 567 Thread Sealant. If sealing potable water systems, use Loctite 577 Pipe Sealant or Loctite 55 Pipe Sealing Cord.
Is Loctite safe for potable water?
Excellent peel, impact and shear strength. NSF/ANSI 61 certified for potable water.
How do you use Loctite 567?
Apply a continuous bead of Loctite 567 thread sealant to male threads starting one thread from the end of the pipe and finish 3 threads later. The bead should be fully and continuously applied in the groove of the threads, 360° around male threads. 4. Assemble parts wrench tight.
Does Loctite 567 have PTFE?
LOCTITE® 567™ High Temperature Thread Sealant with PTFE is a general purpose instant thread sealant for taper/taper threads and fittings.
Can you use Loctite 567 on PVC?
It is NOT for use with plastics or non-metallic fittings. For best results, clean all surfaces (external and internal) with a cleaning solvent and allow to dry. If the material is an inactive metal or a rapid cure time is required, spray with Activator N7471 or T7649 and allow to dry.
How do you use Loctite 567 thread sealant?
Apply a continuous bead of Loctite 567 thread sealant to male threads starting one thread from the end of the pipe and finish 3 threads later. The bead should be fully and continuously applied in the groove of the threads, 360° around male threads.
What is the difference between Loctite 567 and 577?
Loctite 567 : It is a high viscosity, low strength acrylic instant sealant for tapered and straight fittings. Loctite 577 : Medium-strength, general purpose thread sealant for straight/straight and straight/taper threads and fittings. Fills the space between threaded parts and seals and locks at the same time.
Is there a food grade Loctite?
LOCTITE® 2046™ Threadlocker is a room temperature-curing anaerobic adhesive designed to lock and seal threaded fasteners on food and beverage processing equipment, ensuring properly secured hardware and improved equipment reliability.
Can Loctite 567 be used on plastic?
Loctite 567 PST is ABS approved for marine applications and is also approved for use in DEF applications (must be fully cured prior to use). It is NOT for use with plastics or non-metallic fittings. For best results, clean all surfaces (external and internal) with a cleaning solvent and allow to dry.