What is the procedure for a chemical spill?

What is the procedure for a chemical spill?

Call 911 immediately and request emergency and medical responders. Provide as much information known about the incident including specific location, nature and extent of injuries, name and quantity of chemical involved, any control measures taken and possible health hazards associated with the spill.

What are the 7 steps of spill response?

7 Steps To Spill Response

• IDENTIFY THE SUBSTANCE & DETERMINE THE RISK.
• PROTECT YOURSELF.
• STOP THE SPILL.
• CONTAIN THE SPILL.
• MINIMIZE THE RISK.
• CLEAN UP THE SPILL.
• DECONTAMINATE.

What is the first thing you do if you accidentally spill a chemical?

First Aid: Chemical Exposure

1. Stop the source. Remove the victim from contact with the chemical spill, airborne particles, or fumes.
2. Clear the lungs. Take the victim to fresh air.
3. Flush the eyes. Flush the affected eye with water for at least 15 minutes.
4. Clean the skin.

What are the 3 steps to respond to a spill?

1. Communicate the hazard. Immediately notify others working in the area and any supervisory personnel of the hazard, and if the situation warrants it, evacuate the area.
2. Control the spill. This step focuses on ensuring that the spill does not become any worse.
3. Contain the hazard.
4. Clean up the spill and any damage.

What is the spill procedure?

Isolate the area (don’t let others walk near or through the spilled material) Alert people in the immediate area of spill. Avoid breathing vapors from spill (if this is unavoidable, evacuate the lab and call for help). Put on protective equipment, including safety goggles, suitable gloves, and long sleeved lab coat.

What is spill response protocol?

The following steps should be taken during simple spill clean up. Prevent the spread of dusts and vapors. Control the spread of liquid. Neutralize acids and bases, if possible. Absorb the liquid.

What first aid procedures would be used for chemical spills at your kitchen?

When a chemical spill occurs, there are five steps to be taken: (a) control the source of the spill; (b) contain the spill; (c) isolate the area concerned (if appropriate); (d) contact the authorities (if appropriate); then (e) clean up the spill.