What are the different country codes?
Country Codes
| COUNTRY | COUNTRY CODE | AREA KM2 |
|---|---|---|
| Albania | 355 | 28,748 |
| Algeria | 213 | 2,381,740 |
| American Samoa | 1-684 | 199 |
| Andorra | 376 | 468 |
What does it mean when your check engine light blinks 5 times?
If it blinks five times, the readiness set, the test cannot be completed. So, at some point the readiness codes were cleared. On page 413 of the manual is a procedure to force the readiness codes.
How do I turn off ECON mode on my international truck?
Luckily, switching between driving modes and knowing how to turn off Econ on an International Truck is easy. Drivers can turn this function on or off with a button on the shifter. Simply push the button with your thumb, and you should see the Econ light turn off.
How do I reset the ABS light on my international truck?
Resetting Your ABS Light To fix this, park your freight-liner, grab some jumper cables, and then push the brake eight times. This should fix the issue. Using a scanner could help diagnose the problem too. It should show codes.
What is SPN and FMI?
Suspect Parameter Number (SPN) Represents the SPN with error. Every defined SPN can be used in a DTC. Failure Mode Identifier (FMI) Represents the nature and type of error that occurred, e.g., value range violation (high or low), sensor short-circuits, incorrect update rate, calibration error.
What are FMI codes?
The codes are displayed in the form “SPN – FMI”. The ECM / ECU also attaches a text description to the message that is transmitted over the J1939 data link….Failure Mode Identifier (FMI) Codes on J1939 data link.
| FMI | Description |
|---|---|
| 4 | Voltage Below Normal |
| 5 | Current Below Normal |
| 6 | Current Above Normal |
| 7 | Not Responding Properly |
What does the stop engine light mean?
It means the truck has a serious engine system problem and that the vehicle should be brought to a safe stop and turned off immediately.” If the Stop Engine light is flashing, it means the driver has 30 to 60 seconds to park before the engine shuts down.
What country has the international dialing code?
International Dialling Codes
| Country | Country Code | International Prefix |
|---|---|---|
| American Samoa | +684 | 00 |
| Andorra | +376 | 00 |
| Angola | +244 | 00 |
| Anguilla | +1-264 | 011 |
What are the trouble codes for International trucks?
International Trucks Diagnostics Trouble Codes (DTCs) for Model: 3200, 4100, 4300, 4400, 7300, 7400, 7500, 7600, 7700, 8500, 8600, BE 200, CE Bus, CXT, DuraStar, LoneStar, MXT, ProStar, RXT, TranStar, WorkStar
Where do I find the Diagnostic Code on my truck?
The ability to display diagnostic trouble codes (DTC) is an optional feature. Codes may be displayed on either the gauge cluster or an optional vehicle information display (VID). The vehicle must be equipped with the option to display codes in both cases.
What are the International fault codes for Navistar trucks?
Fault Codes DTC of International Navistar Truck 311 EOT Engine Oil Temperature signal out-of-range low 312 EOT Engine Oil Temperature signal out-of-range high 313 EWPS Engine Oil Pressure below warning level 314 EWPS Engine Oil Pressure below critical level 315 EWPS Engine speed above warning level
Where do I find the diagnostic trouble code?
The ability to display diagnostic trouble codes (DTC) is an optional feature. Codes may be displayed on either the gauge cluster or an optional vehicle information display (VID). The vehicle must be equipped with the option to display codes in both cases. Codes will not be displayed on the gauge cluster if the vehicle is equipped with the VID.