Why is the screen on my Panasonic phone blank?

Why is the screen on my Panasonic phone blank?

Recharge the handset – place the handset on the base unit for recharging. If after recharging the screen is blank or won’t turn on, reset the handset. Remove the handset cover at the back of the cordless handset. Remove the battery for a few seconds and insert the battery and close the cover.

Why is there no display on my Panasonic cordless phone?

Please press the “End call” button for about 5 seconds in order to attempt turning ON the handset. Next, if the screen is still blank, you may try to reset the unit by removing the batteries from the unit and placing them back, then turning the unit ON as per previous indications.

How do I reset my Panasonic cordless phone?

How to Factory Reset Panasonic Phones

1. Press the Menu soft key (middle soft key) at the bottom of the screen.
2. Select System Settings from the menu.
3. Enter #136 on the keypad.
4. Select Yes when asked if you are sure you want to factory reset the phone. The phone will be reset successfully after startup.

Why did my cordless phone stopped working?

Unplug any power supplies connected to your product. Remove any installed batteries or battery packs. Install the batteries. If your product is a cordless telephone, allow time for the cordless handset(s) to establish a link with the base.

What causes a phone screen to go blank?

If you’re still staring at a blank screen, it’s possible that the cable connecting the logic board to the LCD screen has become disconnected. This can occur if you accidentally drop your phone a few times. In order to regain your screen’s functionality, the cable will need to be plugged back in.

Where is reset button on Panasonic cordless phone?

To perform a hard reset on a Panasonic Base using Pairing button

1. On the Panasonic Base, hold down the “Handset locator button” on the right side for 40-45 sec.
2. Once the base has completed the process it will reboot.
3. Follow steps 1-5 from above, To perform a factory reset on a Panasonic DECT phone.

Why has my Panasonic phone stopped working?

Power Problems Power issues are a common problem with cordless phones. Fortunately, they’re pretty easy to solve. Check that the AC cord on the base unit is plugged into a power outlet, and that the telephone cord is properly inserted into a phone jack. Each individual handset also needs to be charged.

Why did my phone screen go black and wont turn on?

Plug in phone, wait five minutes, and then try to do a Force Restart. This ensure the phone has enough power to restart, and restarting could clear any errors that might be affecting the screen. If possible, remove the battery, wait 30 seconds or more, and then reinstall the battery and start your phone.

How do I reset my Panasonic phone?

Restore with hard reset or Recovery mode Panasonic Eluga Ray

1. 1- First turn off your Panasonic Eluga Ray completely.
2. 2- Keep holding on volume down and power keys together for a few seconds.
3. 3- When the Panasonic logo is displayed, release the buttons.