What is a universal steering wheel control interface?
The Scosche LUSWC Universal Steering Wheel Control Interface provides data bus and vehicle systems integration for a seamless installation of an aftermarket stereo into a modern dashboard. This universal steering wheel interface retains factory steering wheel control functions including phone buttons.
How do I program my SWI RC 1?
Programming The Vehicle Version # 1. Press and hold programming button on the side of the SWI-RC, and turn the vehicle ignition to the ON position while still holding the button. The LED on the SWI-RC will turn on. Release the programming button and the LED will turn off.
What is a radio replacement interface?
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
How do you wire Axxess?
From the 12- and 24-pin harness: Connect the Yellow wire to the radio’s 12-volt battery or memory wire. Connect the Black wire to the radio’s ground wire. Connect the Blue wire to the antenna turn on wire of the aftermarket radio. Connect the Green wire to the radio’s left rear positive speaker output.
Does Aswc 1 work with Boss Radio?
The 3.5mm adapter is included with the ASWC-1. The Key GND wire from the Boss stereo will connect directly to chassis ground. Key A or 1 wire will connect to the solid brown wire on the 3.5mm adapter. The 3.5mm adapter is included with the ASWC-1.
How do I reset my SWI RC 1?
A. The interface can be reset, when not connected via USB, by pressing and holding the programming button on the side of the interface for seven seconds until the LED turns amber. This reset can only be done while the module is connected to the vehicle.
What does the Axxess steering wheel control interface do?
Auto Detection: The Axxess Steering Wheel Control Interface has the ability to auto-detect certain vehicles and aftermarket radios. It will preset the steering wheel controls to the aftermarket radio automatically, so no programming is required.
How does the aswc-1 steering wheel control adapter work?
It will preset the steering wheel controls to the aftermarket radio automatically, so no programming is required. Manual Programming: If your vehicle is not auto-detection compatible, you can still manually program the ASWC-1 to your vehicle’s factory steering wheel controls and aftermarket head unit.
What kind of steering wheel controls do Metra use?
To get a detailed description of each category and it’s available options, to help you make the correct selection. Keep your factory steering wheel controls with Metra’s ASWC-1.
What do you need to know about the aswc-1 interface?
ASWC-1 One Interface does it all – No additional interfaces needed Designed to be compatible with all major radio brands Auto detects (1) vehicle type, radio connection, and presets controls Ability to dual assign steering wheel control buttons Can be manually programmed for most vehicles