What kind of wood should I use for a bar top?
Finding the Best Wood for Bar Tops
- Reclaimed wood is the best wood for bar tops if you want a rustic bar.
- Oak is strong, stiff and resistant to warping.
- Wood bar tops can be pale honey-colored, classic dark brown or dramatic golden brown.
How thick should a wood bar top be?
1 3/4-inches
The minimum bar top thickness is 1 3/4-inches utilizing a flat grain wood. Increased thicknesses are available using a built-up assembly or other construction styles, such as edge grain. The front overhang for the patron side of the bar is typically 6- to 12-inches if you intend to have bar stools.
What is the best thing to use for a bar top?
When it comes to making DIY bar tops, plywood is an excellent material to choose since it is so affordable and is also very easy to work with.
How much of an overhang for a bar top?
The bar top overhang should be a minimum of 8-1/2” and could be as much as 10” so your knees do not hit the bar front. For our extra tall customers the 10” overhang maybe necessary.
How much overhang should a bar top have?
How much depth do you need for a bar?
The dimensions of a typical bar are fairly standard. A finished bar height surface that works well for the average height person is 42 inches. The bar top should be at least 18 inches deep. 20 to 24 inches is better if you have the room.
How do you support a wood bar top?
When installing a bar at a restaurant, the countertop will be overhanging for stools to fit under. The wooden or stone countertop must be supported and an option is to use wooden right angle corbels. We don’t recommend using wooden corbels because they must be large to reliably support the bar.
What is the standard overhang for a bar top?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
How thick should my countertop be?
The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.
What is proper bar height?
42”
The standard bar height from the floor to the top of a bar top (excluding the bar rail) should be 42”. This allows for a standard 30” high bar stool to seat you comfortably at your bar.
What should I use to build a bar top?
If you slop seal onto the face grain, sand it off. Most bar moldings fit over a bar top made from two layers of 3/4-in.-thick material. The lower layer is usually plywood. The top layer can be plywood, solid wood, hardwood flooring, or even tile or stone.
What kind of wood do you need to build a bar?
The lower layer is usually plywood. The top layer can be plywood, solid wood, hardwood flooring, or even tile or stone. You won’t find bar molding at home centers or lumberyards, but there are dozens of suppliers online. Costs range from $10 to $40 per linear ft., depending on wood species and width.
How to build a bar out of plywood?
Measure the inside edge of the plywood side pieces and cut two 1×12 boards to that length. Set them flush with the inside back corners, and measure outside edge to outside edge to get the length of the front 1×12. It will overlap the seams of the base layer. Cut the front piece to length.
What’s the minimum thickness for a bar top?
Drink rails are typically 3/4-inch deep by 4-inches wide. » The minimum bar top thickness is 1 3/4-inches utilizing a flat grain wood. Increased thicknesses are available using a built-up assembly or other construction styles, such as edge grain.