How do you get the Supportshow from the Brocade switch?

How do you get the Supportshow from the Brocade switch?

Run the Brocade supportshow command….show tech-support details

1. Select the switch that you want to collect data from.
2. Select Maintenance and then Data Collection.
3. Enter a file name to call the file and then select save. Note the directory where the data is saved.

How do I collect Supportshow?

Collect supportshow log from a SAN switch

1. Log in to a SAN switch using an SSH client like PuTTY, as shown below. Default username/password for a 8/24 Base 16-ports Enabled SAN Switch are admin/password.
2. Run the supportshow command.
3. Collect or copy the output in a log file and send the same to support team.

How do I get Supportsave Brocade?

Answer

1. Log on to the switch as admin using telnet or ssh.
2. At the command prompt type: supportsave.
3. You are prompted as: a) the IP address of your FTP server.
4. The files generated by this command are compressed before being sent off the switch. You can then compress these files together before sending to IBM Support.

What is Supportsave?

switch> supportsave. This command collects RASLOG, TRACE, supportShow, core file, FFDC data, and other support information from both active and standby CPs, and then transfer them to the FTP/SCP/SFTP server or a USB device. This operation can take several minutes.

How do I enable FTP on Brocade SAN switch?

Backing up a Brocade switch

1. Establish a putty session to the switch and login as normal.
2. Enter the command configupload.
3. At the protocol selection prompt choose the protocol appropriate for you FTP server.
4. At the IP Address prompt enter the IP address of the FTP server Server Name or IP Address [host]: 10.10.10.5.

How do you collect SupportSave from Brocade switch HPE?

To collect a supportsave from the client and server of BNA itself, do the following in BNA:

1. Select Monitor; Technical Support; SupportSave.
2. Select the server SupportSave check box to run supportsave on the server.
3. Enter a file name for the server support save file in the File Name field.

How do you get the SupportSave from BNA?

Collect BNA Server SupportSave via GUI Go to the menu Monitor -> Technical Support -> SupportSave (this is for the BNA Software, for switch SupportSave you need to select Product / Host SupportSave). Click OK and BNA will start collecting the BNA Server SupportSave.

How do you check active zone on Brocade?

Zoning steps:-

1. Zoning steps:-
2. Identify the WWPN of Server HBA and Storage HBA.
3. Create Alias of server and storage HBA’s.
4. Alicreate.
5. Create zones for server and storage by using the command.
6. Zonecreate.
7. We need to check whether active configurations is present or not by using the command.
8. Cfgactvshow.

What are hanging zones?

Hanging zones are the purposeless zones residing in the zoning configuration. The zone in which all initiators or all targets are inactive are considered as hanging zone. There is no specific command to list out hanging zones in the fabric, we have to use SAN health to identify the hanging zone.

How do you set up a Brocade SAN switch?

Connecting to the CLI

1. Connect the workstation to the Ethernet network containing the HPE Synergy Frame Link Module.
2. Connect to the switch using ssh or open a Telnet connection using the IP address set earlier.
3. Enter the user name, using an administrative account.
4. Enter the password.
5. Verify the login was successful.

How to collect a SupportSave from a brocade switch-IBM?

Brocade switch supportsave is needed by IBM support to look into any issues related to SAN. Collecting supportsaves from the switch CLI requires that you have an internal FTP/SFTP or SCP server in your network. Steps to collect supportsave. 1. Log onto the switch as admin using telnet or ssh.

How to collect logs from a brocade switch?

Supportsave requires an FTP server to upload the logs to, if you don’t have an FTP server you can connect to the switch using Putty and choose to save the output to a file and then run a supportshow. The following procedure shows how to collect logs from a Brocade switch via the CLI: 1 Connect to the switch via CLI.

Why do I need to run brocade SupportSave?

A Brocade supportsave command saves a wealth of logs and information that can be useful when troubleshooting an issue. It is also a recommended procedure to run a supportsave before upgrading the firmware on a switch, so that you have the necessary information to hand should there be an issue.

How to stop capturing text from a Brocade Fibre switch?

On the HyperTerminal window click the “ Transfer ” menu and then select “ Capture text ” and then select “ Stop ” to stop capturing the text, you can now open C:\\fibreswitch1.txt which will contain all the information from your support show command from that fibre switch Thank you! Trying to get the full output has been driving me nuts!