How do I fix code P0171 Ford?
Remove the mass air flow sensor and clean the sensor using mass air flow cleaner or contact cleaner. Reinstall the mass air flow sensor and clear the check engine light using FIXD. If the check engine light comes back on with code P0171 continue the diagnostic process.
How do I fix error code P0171?
What repairs can fix the P0171 code?
- Replacing the fuel pump.
- Replacing the fuel filter.
- Replacing the fuel pressure regulator.
- Replacing the powertrain control module.
- Replacing one or more injectors.
- Replacing one or more oxygen sensors.
- Replacing the mass air flow sensor.
- Repairing a vacuum leak.
What is Bank 1 too lean?
The OBDII trouble code P0171 – System Too Lean (Bank 1) means that the engine air-fuel mixture is too lean, or there is too much air and too little fuel. Driving a car with the code P0171 can cause more damage to the engine over time, as when the engine runs lean, the combustion temperature is higher.
What does code P0171 mean?
What Does P0171 Mean? Combustion engines run most efficiently when they maintain an air-fuel mixture ratio of 14.7 parts air to 1 part fuel. When there are more than 14.7 parts air to 1 part fuel in the air-fuel mixture, a lean condition exists and code P0171 is triggered.
How much does it cost to fix P0171?
Perhaps your P0171 OBD-II Trouble Code: System Too Lean Bank 1 trouble code is appearing because it is due to you needing to replace your fuel injector/injectors. Generally, a fuel injector replacement cost will between $800 and $1,450 for a full replacement.
What is po171 code for Ford?
A Ford P0171 is a LEAN code for cylinder bank 1, and P0174 is a LEAN code for cylinder bank 2. These codes commonly occur on many Ford vehicles, and are set when the powertrain control module (PCM) sees the air/fuel mixture is running too lean (too much air, not enough fuel).
Can a dirty air filter cause P0171?
Can a dirty air filter cause a P0171 code? If the filter is clogged or excessively dirty, this is enough to impede or restrict the air flow, hence resulting in a lean running condition. Besides a dirty air filter, the P0171 code can also be blamed on a dirty or faulty MAF sensor and a clogged fuel filter.
What is p0171 engine code?
The P0171 OBD-II code means that, on the first bank of the engine , the fuel system is running weak or a vacuum leak exists near this side of the engine. A lean condition occurs when the engine either receives too little fuel or too much air. What are the causes of the P0171 code? Causes of the P0171 code may include:
What causes p0171 on Ford Ranger?
Vacuum Leaks – With the Ford Ranger,one of the most common cause for the P0171 code to show is a vacuum leak.
What are the trouble codes Ford Explorer?
The P0304 trouble code will trigger the Explorer’s service engine soon light.