Is Ford 460 a good engine?
7.5L Ford 460 Reliability The 460 engine has a 30 year history for a reason: it is extremely reliable.
When did Ford put 460 in trucks?
The 460 cubic inch eight-cylinder motor debuted all the way back in 1968 but found itself powering cars, trucks, and commercial equipment all the way to the end of the 1990s during its three decade run.
How many horsepower is a 460 Ford?
The Ford 460-cubic-inch, V8 engine has a cylinder bore of 4.36 inches and a crankshaft stroke of 3.85 inches. The output for 460 engines built before 1972 is 365 horsepower at 4,600 rpm and 485 pound-feet of torque at 2,800 rpm.
Is a Ford 460 a big block?
The name “Big Block” refers to a series of Ford engines that ranged from 429 cubic inches in size to 460 cubic inches. These engines were used as power producers for a variety of purposes, both private and commercial in nature. Even finding use as a boat engine, the 460 gained a strong reputation.
How many miles can you get out of a Ford 460 engine?
However a 460 can last past 125k. Just make sure to keep it tuned regurally and use good oil. I’ve seen 454’s with over 150k still going strong. Big motors like the 460 weren’t meant to go 2-300k, but they can if properly cared for.
What gas mileage does a 460 get?
What gas mileage does a 460 get? 14.3 mpg on the highway, 10-12 in town, anywhere from 7-12mpg while towing depending on load.
What is Ford’s biggest motor?
The Ford Motor Company has built nearly every kind of V8 engine we can imagine over the past century, but the biggest was the 1100 CID GAA tank engine of World War II.
How much horsepower can you get out of a 460?
Adding the ported heads, COMP Cam and Weiand intake to the stock 460 increased the power output by over 110 hp at 5,500 rpm. In stock trim, the 460 produced 349 hp and 492 lb-ft of torque. After the upgrades, the peak numbers jumped to 437 hp and 507 lb-ft of torque.
How much power can a 460 make?
When did the Ford 460 become fuel injected?
1988
Initially reduced to 212 hp, the 460 saw its output change nearly on a yearly basis (to improve its fuel economy and emissions performance), dropping as low as 197 hp in 1977. Following its 1983 reintroduction, the 460 received fuel injection for 1988; power jumped to 235hp@4100rpm and 395ftlbs@2200rpm.
What is Ford’s best engine?
Voodoo V8 is one of the most powerful and the best engines produced by Ford. The company presented its engine called Cayote 5.0 V8 in 2010, and it was called the best modern engine at the time. Coyote V8 featured different modern components such as a 32-valve head, variable valve timing system, and much more.
What is the weight of a Ford 460 big block?
A 460-cubic-inch engine block is 34 inches long, 32 inches wide and 30 inches high. The dry weight without gas and oil is approximately 720 pounds.
What is a Ford 460 engine?
The Ford 460 cubic-inch engine is a big-block engine manufactured between 1968 and 1996. Best known as the engine that powered Starsky and Hutch ‘s “General Lee” Torino, the 460 was designed for large vehicles.
What are the dimensions of a Ford 460 engine?
General Information The Ford 460-cubic-inch, V8 engine has a cylinder bore of 4.36 inches and a crankshaft stroke of 3.85 inches. The output for 460 engines built before 1972 is 365 horsepower at 4,600 rpm and 485 pound-feet of torque at 2,800 rpm. A 460-cubic-inch engine block is 34 inches long, 32 inches wide and 30 inches high.