Can you switch the door on a Frigidaire refrigerator?
When you install your Frigidaire refrigerator or move it to a different location, you may find the direction in which your doors swing open to be inconvenient. Most Frigidaire refrigerator/freezer models allow you to reverse the door so it opens from the opposite side.
What is door switch in refrigerator?
Locate your switch. It is activated when the door closes on it, so it will be visible with the door open. It will be located somewhere along the internal frame of the refrigerator. Once you have located the door switch, remove it. There may be a single screw retaining the door switch inside its housing.
Why is the green light blinking on my Frigidaire freezer?
Some models have a green LED Power On Light projected on the floor. Note: this light will flash continuously until the freezer reaches the selected temperature. To ensure safe food storage, allow the appliance to operate with the door closed for at least 8 hours before loading it with food.
Can a refrigerator door be reversed?
It’s important to remember that your refrigerator door can be reversed at any time. That means that even an older refrigerator can usually be reconfigured for your space.
How do you replace a Frigidaire refrigerator switch?
Placed wires on new switch, pushed wires back through the hole and seated the switch. Plugged in the freezer and opened the door – magic, the light came on. Replaced the front kick panel (hardest part was to line up the plate holes with the holes in the mounting bracket).
How big is the light switch on a Frigidaire refrigerator?
This is the replacement light switch for your refrigerator. It is white in color and is approximately 2inches long and 1 inch wide. If the light is not working or stays on, you may need to replace the switch. It is an OEM part, directly from the manufacturer.
How can you tell if a Frigidaire refrigerator switch is defective?
If you want to test to see if the switch is defective, take a insulated jumper wire, and attach it between the two wires. Plug the refrigerator back in and see if the light comes on. If the light does come on, replace with a new switch by re-attaching the wires and placing it back in the hole firmly.