What is a turbo oil feed pipe?

What is a turbo oil feed pipe?

In turbocharged engines, the oil feed pipe (or line) is connected to the engine lubrication system. The feed pipe supplies engine oil from the engine block directly to the turbo’s bearing system, securing lubrication and cooling for the turbo shaft.

How do I know if my turbo is blown?

The most common signals that you may have a blown turbo are:

1. The car has noticeable power loss.
2. The acceleration of the car seems slow and noisy.
3. The car doesn’t easily maintain high speeds.
4. There is smoke coming from the exhaust.
5. There is an engine fault light on the dashboard.

What happens when turbo seals fail?

If the seals between the compressor and the engine become worn or cracked, oil will leak into the exhaust system. As a result, the turbo has to work harder to increase air pressure. This problem is also known as over-speeding. Ultimately, it will reduce the efficiency and the boost delivered by the turbo.

What does it mean if your turbo is leaking oil?

If the oil level is too full there will be nowhere for the oil to flow, causing a build-up of oil pressure in the bearing housing. This will cause oil to leak from both the turbine and compressor ends. This can then force out oil from both the compressor end and turbine end giving the impression of a leak.

What does a turbo oil feed line do?

The turbo oil drain is a pipe that connects your turbo chargers oil gallery to the engine, this drains the oil away from the bearings inside the turbo charger. The pipe is connected typically to the sump or the lower portion of the engine block.

Why does turbo leak oil?

Oil leaks can be caused by a variety of factors, the main factor being incorrect pressure within the compressor and turbine housings. Oil leaks can cause catastrophic damage to the bearing systems and occur within seconds of the turbocharger commencing operation.

Can a bad turbo cause engine damage?

Can you drive with blown turbo? The longer you drive your car with a blown turbo, the more damage the engine will have and therefore the more costly it will be to repair. The longer the blown turbo is left without repair, the more damage can be caused to the car’s engine.

Is it possible for a turbocharger to leak oil?

Oil leaks can cause catastrophic damage to the bearing systems and occur within seconds of the turbocharger commencing operation. When a turbocharger is installed correctly, it should NOT leak oil, however, there can be cases where oil leaks occur. The following highlights some of the main causes and signs of oil leaks.

What causes an oil leak in an engine?

PLEASE NOTE – An oil leak can also occur when engines are running on idle. The pressure within the housings is lower, which in turn can lead to a vacuum being created, causing the oil to leak into the turbine housing. Once the engine starts to run at normal speeds the pressures will be restored and the leaks will stop.

Can a 2.2 HDI Turbo leak oil?

Mines leaking after a fresh rebuild and just running on the lift If the problem is fixed on the return line, The turbo should be fine. It is very rare for it to cause damage. Hi I have a 2.2 HDI that leaks oil in the intercooler and then burns it.

What to do if your Turbo starts to leak?

Ok, back to the topic of the leaky turbocharger. If your turbo has been fine for years and it starts to leak. You need to look at a few things. First off check shaft play. There is always a little side to side. But, it shouldn’t touch the compressor housing. Next check the in and out play. You really shouldn’t feel much at all.