What does STGO Cat 2 mean?
STGO Cat 2 vehicles are subject to specific speed restrictions. The speed limit on a motorway is 40mph, on a dual carriageway it is 35mps and just 30mph on other roads. The STGO Cat 2 plate displayed on the vehicle must show the maximum weight recommended by the vehicle manufacturer when travelling at certain speeds.
What is STGO cat?
STGO stands for Special Types General Order. STGO is the abbreviation that appears on the plate on the front of Heavy Haulage tractor units, to indicate what weight Category they are licensed for operation at. There are three “Categories”; Cat 1, Cat 2 and Cat 3.
What is classed as an abnormal load?
An ‘abnormal load’ is a vehicle that has any of the following: a weight of more than 44,000kg. an axle load of more than 10,000kg for a single non-driving axle and 11,500kg for a single driving axle. a width of more than 2.9 metres. a rigid length of more than 18.65 metres.
What is the maximum projection before markers are needed?
Explanation: Projection marker boards must be fitted if the load on your vehicle overhangs by more than 2 metres (6 feet 6 inches). This will help other road users who may not notice the projecting load.
What is a 102 restriction?
102 – drawbar trailers only. 103 – subject to certificate of competence. 105 – vehicle not more than 5.5 metres long. 106 – restricted to vehicles with automatic transmissions. 107 – not more than 8,250 kilograms.
What overhang is legal on a car UK?
1. Loads overhanging the front or rear of the vehicle
| Length of projection | Action if load projects rearwards |
|---|---|
| More than 1 metre, but not exceeding 2 metres | End must be made clearly visible. ( C&U Schedule 12, para 4 |
| More than 2 metres, but not exceeding 3.05 metres. | Marker boards required ( C&U Schedule 12, para 3) |
What is classed as a special vehicle?
Special types vehicles are those which don’t meet the C&U and AW Regs but can be used outside these rules under the authority of the Road Vehicles (Authorisation of Special Types) (General) Order 2003 ( STGO ).
What is a permitted load?
Typically, the maximum legal load width is 8.5 feet, and the maximum height limit is 13.5 to 14.5 feet. Any load more than 8.5 feet wide is, by definition, an oversize load, and with few exceptions will require a state permit to travel on public highways.
What overhang is legal on a vehicle UK?
How far can something hang off a trailer?
California. California allows cargo to overhang a vehicle by 4 feet beyond the rear, 3 feet beyond the front and 4 inches beyond the side of the vehicle. You must use markings if the load extends 1 foot or more to the left or over 4 feet to the rear of any vehicle.
How far can something overhang a trailer?
According to the United States Department of Transportation’s Federal Size Regulations law, cargo can overhang a vehicle in the front by 3 feet, on the side by 4 inches and in the rear by 4 feet.
What’s the maximum weight on a Stgo Cat 2?
The STGO Cat 2 plate displayed on the vehicle must show the maximum weight recommended by the vehicle manufacturer when travelling at certain speeds. This plate must be marked “Special Types Use” and should show the weights for gross, train and axle weights. STGO Category 3 vehicles can not exceed 150,000kg.
What are the requirements for a Stgo Category 2 vehicle?
An STGO Category 2 vehicle must not exceed 80,000kg. There are a number of other conditions that apply to the category. Category 2 vehicles must have a minimum of 6 axles, with the combined axle weight not exceeding 12,500kg. In addition, a vehicle in this category must display the “STGO Cat 2” plate to the front of the towing vehicle.
What do you need to know about Stgo Cat 1?
All STGO Cat 1 vehicles must display a “STGO Cat 1” plate to the front of the towing vehicle. Before an STGO Cat 1 vehicle is to be used on the highways a minimum 2 days’ notice must be issued to highways and bridge authorities about the weight and the police may need to be informed of the vehicles’ dimensions.
What does Stgo stand for in tractor category?
STGO is the abbreviation that appears on the plate on the front of Heavy Haulage tractor units, to indicate what weight Category they are licensed for operation at. There are three “Categories”; Cat 1, Cat 2 and Cat 3.