How do you get output waveform in PSpice?
Add the waveform for output voltage on this axis by clicking on the Add Trace icon, and selecting Vout from the trace list. PSpice has the ability to retrieve the previous plot settings, even when you make any changes to the schematic. Enable last plot from the Probe Window settings in the simulation setup.
How do you use PSpice for circuit analysis?
To use PSpice, start with the PSpice Schematics program. When you start up you will get a screen which looks like this: To put in a component, use the Draw drop-down menu, and select Get new part (or use the shortcut Ctrl-G). This will bring up a dialog box which will allow you to select pats from libraries.
What is PSpice analysis?
PSPICE is a circuit analysis tool that allows the user to simulate a circuit and extract key voltages and currents. Information is entered into PSPICE via one of two methods; they are a typed ‘Net List’ or by designing a visual a schematic which is transformed into a netlist.
Can bias point analysis done using PSpice?
DC Bias Point Analysis In PSpice, the bias point analysis calculates the node voltages and currents through the devices in the circuit. After a simulation is run, the bias voltage, current, and power values can be displayed on the schematic.
What is bias point simulation?
The bias point simulation calculates the DC bias point based on DC source values and any initial conditions set on the circuit. If there are transient sources present in the circuit the bias point calculation will use their value as defined at time=0.
What is DC sweep analysis in PSpice?
DC sweep analysis in PSpice allows you to sweep a source, voltage, or current, a global parameter, a model parameter, or the temperature through a range of values. For the example circuit, let’s very drain-to-source voltage, VDS, from 0 to 10 volts with an increment of 100 millivolts.
How does PSpice calculate phase difference?
To calculate gain in PSpice, simply divide the output voltage amplitude by the input voltage amplitude. To calculate phase shift, measure the time difference between a peak on the input waveform and the nearest peak on the output waveform.
How does pspice measure current?
Current measurement Normally divide voltage you measure on resistor and divide with resistance value and you know current passing in that resistor.
What is DC sweep analysis in pspice?
What is transient analysis in pspice?
The transient analysis is always used when you want to view a graph of a voltage or current as a function of time. Even if the voltages are DC as in the previous tutorials, transient analysis must be used to view a graph of the output versus time. Figure 1. Circuit for PSPICE Simulation.
How to create a new simulation profile in PSpice?
In PSpice for TI, simply choose PSpice – New Simulation Profile from the main menu and give the profile a name. Select a meaningful name, such as “trans,” for a transient analysis profile.
Where to find noise analysis results in PSpice?
Noise Analysis results are found in two places, the output file and in the Probe window. Below is a table reproduced from the PSpice Reference Guide that lists the available noises by device type. Device Type Noise Types*
How is PSpice used to analyze a circuit?
PSpice can be used to analyze circuits that contain dependent sources. The PSpice symbols used to represent dependent sources are labeled as E, F, G, and H (see the table to the right) and are located in the analogy library. Part 2A: Capturing and Simulate a CCCS Circuit
How does AC sweep analysis work in PSpice?
What Does AC Sweep Analysis Do? For an AC sweep analysis, PSpice A/D calculates the small-signal response of the circuit (linearized around the bias point) when sweeping one or more sources over a range of frequencies. Outputs include voltages and currents with the magnitude and phase, which you can use to obtain Bode plots.
https://www.youtube.com/watch?v=8iWago5Dopw