How do I reset my brother DCP T710W ink box full?

How do I reset my brother DCP T710W ink box full?

DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W

1. Press Menu.
2. Press or to select the following: Select [Initial Setup]. Press OK. Select [Reset]. Press OK. Select the reset option you want to use. Press OK.
3. Press for [Reset] to confirm.
4. Press for [Yes] to reboot the machine. The machine restarts.

How do I fix Print Unable 48?

“Unable to Print 48”

1. Using both hands, use the finger holds on each side of the machine to life the scanner cover into the open position.
2. Carefully check the left (1) and right (2) hand corners and the center inside the machine and remove any paper scraps that may be jammed.

How do I fix init unable 48?

“Unable to Init. 48”

1. Confirm the error message appearing on the display.
2. Press Stop/Exit to temporarily clear the error message.
3. Unplug the machine from the power outlet.
4. Print a User Settings Report to test.
5. Your machine will require service.
6. Transferring stored faxes to another machine.

What do you mean by ink box full?

The error “Ink Box Full” means that the internal ink absorber or flushing box will need to be replaced. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system.

How do you flush the ink on a Brother DCP T710W?

You can also clean the print head from your computer….DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W

1. Select [Maintenance]. Press OK.
2. Select [Cleaning]. Press OK.
3. Select [Black], [Colour], or [All]. Press OK.
4. Select [Normal], [Strong], or [Strongest]. Press OK.

How do I reset my DCP t300?

Reset the network settings to the factory default.

1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
2. Press Menu.
3. Press the Up or Down arrow key to choose Network and press OK.
4. Press the Up or Down arrow key to choose Network Reset and press OK.