How do I reset my Shaw universal remote?

How do I reset my Shaw universal remote?

To perform a factory reset:

  1. Activate the programming mode on your remote.
  2. Press 9 – 8 – 1.
  3. The LED will blink green twice to indicate that the remote was reset.
  4. After the factory reset is complete, you’ll need to re-pair your remote with a TV box.

How do I get my Shaw remote to control the volume?

Locking Volume Controls to Audio Devices Press and hold the SETUP button until the mode key flashes twice in a row. Enter the code 9 – 9 – 3. Press the mode key on which your audio system was programmed (AUD, AUX, etc…). This will lock the volume to that device.

Why is my Shaw remote not working?

Change the batteries: When the battery power is low, the Shaw remote will not function optimally; it may still be able to communicate with the Digital Box intermittently, or not at all. Replace the batteries with a new set to check whether this resolves the issue.

How do I program my Shaw remote to my TV?

Quick setup remote pairing

  1. Press and hold SETUP until the remote light turns green green.
  2. Press the SHAW button. The remote light will start blinking green.
  3. Press the SHAW button again.
  4. Enter the number sequence shown on the TV by pressing the numbers on your remote control.

How can I program my Shaw remote control?

If you are using an audio system to control the volume while watching TV you can program your Shaw remote to lock the volume button to work only with your stereo. To enable volume lock: Press the mode key on which your audio system was programmed (AUD, AUX, etc…). This will lock the volume to that device.

How does a Shaw Atlas remote control work?

The Shaw Atlas remote can also be set up for master power, which allows the main power button to control the on/off power for all of your equipment at once, so you don’t have to select and power on/off each device separately. Press and hold SETUP on the Shaw remote control until the mode key ( CBL) flashes twice in a row

What kind of remote control do I need for Bluecurve TV?

If you are using BlueCurve TV services, the BlueCurve TV Remote is the only model that will work on BlueCurve TV boxes. In order to program your other Shaw remote controls, please refer to the images below to determine which remote you are currently using. Note: If you’re having issues programming your remote, try the following:

How does the Robertshaw 55644 fireplace remote work?

The 55644 model kit includes a receiver and a remote. The remote has the added convenience of thermostatic control. You set the desired temperature on the remote, and it automatically turns your fireplace on and off without pushing a button!

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top