How do I factory reset my Seagate NAS?

How do I factory reset my Seagate NAS?

Power down the NAS device. After about two minutes, power the NAS device on again. Once the drive has restarted, please use your Seagate NAS Discovery software or use the new IP address assigned from your router to access the NAS. The new admin credentials are now reset to their original settings.

How do I reset my Seagate NAS 4 Bay?

Hold the recovery button while pushing the power button. Continue to push the recovery button for five seconds. Wait for the LED to turn solid. From a computer on the network, launch a web browser and enter http://discover.seagate.com.

How do I reset my Seagate Blackarmor NAS 220?

Seagate strongly recommends that you backup all the data from the NAS before continuing.

1. Click the Factory Default Restore button to begin the process. A prompt will report, “This restores the device back to factory default settings.
2. Click Ok. The system will reboot.

Where is Seagate NAS on network?

Access NAS OS using Seagate Network Assistant

1. Launch Seagate Network Assistant.
2. Choose your device: Windows: Right-click on the Seagate Network Assistant icon in the taskbar to select your Seagate NAS.
3. Select Web access to the NAS OS.
4. The NAS OS login page will launch in an Internet browser.

How do I reset my NAS drive?

Start by locating the reset button on the back of your NAS drive. It’s usually right next to the USB and Ethernet port(s). Next, get a paper clip or a SIM card removal tool and hold down the reset button for about five seconds—until you hear a beep. Then let go immediately.

What is the default username and password for Seagate Central?

admin
Username: the default username is admin.

How do I update my Seagate hard drive firmware?

You can download firmware updates from the Seagate website.

1. Download Drive Detect from the Seagate website (see Resources).
2. Launch the EXE file.
3. Go to Download Finder (see Resources).
4. Choose your country from the drop-down menu.
5. Enter the CAPTCHA and press “Submit Query” to look for new firmware updates.

How do I reset my NAS 220?

Can’t connect to Seagate NAS?

If the Seagate Business NAS is still not showing up on your network: Verify the NAS is directly connected to the same router as the computer you are attempting to connect from. Consider restarting the router. During initial configuration it is advised to avoid using ethernet hubs and switches.

How do I reset my Seagate Personal Cloud?

Reset your Personal Cloud

1. Power off your Personal Cloud using the power button on the back of the device.
2. Insert a paper clip or slim object into the hole on the back of your Personal Cloud and press down the reset button.
3. Power on your Personal Cloud.
4. Wait for a minimum of 20 seconds, and then release the reset button.

How do I reset my NAS password?

You can press the Reset button on the rear panel of the NAS for 3 seconds to reset the administrator password to the default, which varies depending on your QTS version.

How do I factory reset my Synology NAS?

Locate the RESET button on your Synology NAS. Press and hold down the RESET button for about 4 seconds until you hear a beep. Release the button immediately. Press and hold down the RESET button again for 4 seconds until you hear 3 more beeps.