How big is a pole bending pattern?

How big is a pole bending pattern?

The pole bending pattern consists of six 6-foot-tall poles, each with a base no more than 14 inches wide. The first pole is set 21 feet from the starting line, and each pole thereafter is spaced 21 feet apart.

How far apart should the poles be in pole bending?

21 feet
For pole bending, you’ll need to set up a straight line of six poles 21 feet (6.4 m) apart. The line of poles should start 21 feet from the start. The height of the poles should be six feet (1.83 m).

What are the rules for pole bending?

The Rule. The pole bending pattern is to be run around six poles. The poles are 21 ft apart and the first pole is 21 ft from the starting line. Poles are set on top of the ground, 6 ft in height and with a base of no more than 14″ in diameter.

What is the fastest pole bending time?

19.251 seconds
The world record high-school pole bending time is 19.251 seconds by one Avery Weatherman on June 18, 2013, at the Texas State High School Finals. Another Texas high schooler, Rylee Hardin, posted a 19.363 seconds clocking on July 23, 2020, according to Texas newspaper The Graham Leader.

How do you build a pole bending base?

How to Make Pole Bending Bases

1. Purchase six rubber 4-quart size feed pans.
2. Drill a hole in the center bottom of each pan with a 2 ½-inch hole drill bit.
3. Tie a knot in one end of an 18-inch section of 3/8-inch nylon cord.
4. Position a 4-inch section of 2 ½-inch PVC pipe flush with the hole in the bottom of a pan.

What is the barrel racing pattern?

The barrel pattern is fairly simple; there are three barrels set up in a triangular pattern and each rider must turn each barrel in a clover leaf pattern as fast as they can. They will then move in a straight line across the pen to barrel two, where they will make a left handed turn.

Is pole bending Western or English?

The disciplines are different. English consists of jumping, dressage, equitation, and hunter, while western can include barrel racing, pole bending, roping, trail riding, and reining. Both can be ridden on a competitive level with trophies, ribbons, and prize money.

How long is a pole pattern?

A pole is set 40 feet from the start line toward each end of the arena, so they are set 80 feet apart.

How much does a pole bending base weigh?

They cannot be bent or squashed. Each base weighs about 15 pounds, and are the standard 14 inches in diameter.

What is 1D/2D 3D/4D in barrel racing?

1D – Fastest time of race. 2D – .5 seconds off of fastest time. 3D – 1 second off of fastest time. 4D – 2 seconds off of fastest time.

How far apart do you set poles in pole bending?

The pole bending pattern is to be run around six poles. Each pole is to be 21 feet (6.4 meters) apart, and the first pole is to be 21 feet (6.4 meters) from the starting line. Poles shall be set on top of the ground, six feet (1.8 meters) in height, with no base more than 14 inches (35 cm) in diameter.

What are the height of the poles used in pole bending?

For pole bending, you’ll need to set up a straight line of six poles 21 feet (6.4 m) apart. The line of poles should start 21 feet from the start. The height of the poles should be six feet (1.83 m) .

What are pole bending poles?

Pole bending is a timed event that features a horse and one mounted rider, running a weaving or serpentine path around six poles arranged in a line. This event is usually seen in high school rodeos and 4-H events as well as American Quarter Horse Association, Paint, and Appaloosa sanctioned shows as well as at many gymkhana or O-Mok-See events.