How far should damper be open on pellet stove?

How far should damper be open on pellet stove?

about 1/8 inch
Adjusting the Damper As the temperature increases, the damper should be opened, about 1/8 inch at a time, to keep the flame yellow and steady. Whenever a heat adjustment is made, the damper should be opened or closed accordingly by about 1/8 inch.

How do I increase the airflow in my pellet stove?

Pull out on the handle or rod slowly if you have a tall, slow burning flame. Pulling the handle out from the stove increases the amount of air inside the stove. Continue to pull out on the handle until you’re satisfied with the amount of air inside the stove, and the flames burn normally.

What is the best setting for a pellet stove?

Proper placement, correct installation, fuel quality and scheduled maintenance will result in pellet stove operating at peak performance and efficiency. It is best to run the appliance on the lower heat settings like 2 or 3 rather than up at 4 or 5.

How do I get the most heat out of my pellet stove?

5 Ways To Get More Heat From A Pellet Stove

1. Burn high quality pellets low in ash and moisture content.
2. Increase the heat output setting on the stove.
3. Increase the blower speed on the stove.
4. Adjust the airflow in and out of the stove.
5. Clean the stove regularly in line with the manufacturer’s guidelines.

How much clearance do you need for a pellet stove?

You must have 16 inches of clearance between the stove’s top to combustible materials and 3 inches of space from the stove’s vent. There should be no combustibles, such as doors or drapes, within 36 inches of the front or sides of the stove.

How long will a 40 lb bag of pellets burn?

24 hours
A: According to the Pellet Fuels Institute, a 40-lb bag of pellet fuel can provide up to 24 hours of solid heat. A winter’s supply of wood pellets is about 100-150 bags—depending on climatic and lifestyle variations.

Why is the flame so high on my pellet stove?

If your pellet stove’s flame is too high and does not move much, it needs more air. These lazy flames also typically have tips that look dark orange or nearly black. To provide more air, pull out or loosen the damper a little to open it up.

Why is my pellet stove feeding too many pellets?

Why Is My Pellet Stove Feeding Too Many Pellets? A pellet stove that’s feeding too many pellets can be caused by an incorrect set up of the feed rate or a dirty or blocked stove that’s not allowing sufficient air into the combustion chamber, causing poor combustion of the pellets.

Why does pellet stove glass gets black?

Glass on a pellet stove turning black can be caused by an issue with either the fuel or the air supply leading to a poorly combusting fire that’s not burning as cleanly, and releasing more by-products such as creosote as a result. Increased creosote production can lead to increased glass blackening.