How much horsepower can a 200 4R handle?

How much horsepower can a 200 4R handle?

The stock TH200-4R input shaft is safe to about 550 horsepower. Shown here is the end of the shaft that fits into the overrun drum at the rear of the transmission.

Which is better 700R4 or 200R4?

There is also the longer nature of the 700R4 which requires certain modifications in order to cross member and driveshaft. Conversely, the 200-4R can be made to be stronger than the 700R4. It is, however, worthy to note that the 200-4R is popularly known as the weaker of the 200-4R/700R4 pair.

What cars did the 200R4 come in?

200-4R Transmission Spotlight

  • 1981-’90 Cadillac Fleetwood, Deville and Brougham.
  • 1981-’88 Buick LeSabre, Electra RWD, Chevelle, Monte Carlo, Malibu & El Camino.
  • 1982-’90 Chevrolet Impala, Caprice, Olds Delta 88, 98 & Custom Cruiser.
  • 1984-’87 GMC Caballero & Pontiac Grand Prix.
  • 1983-’88 Olds Cutlass 442 & Supreme.

How many gears does a 200R4 have?

Rundown on the Numbers. The 200-4R is a 4-speed automatic overdrive transmission by GM, capable of fitting into most Chevy’s from the 80s and before, built similarly to the TH200 and TH350, as well as the 2-speed Powerglide transmission.

Is a 200 4R a good transmission?

There are several advantages to the TH200-4R: It has a better First-gear ratio, it’s generally the least expensive overdrive automatic, and best of all, it’s virtually a bolt-in replacement for Powerglide/TH350 transmissions.

How do I know if I have a 200 4R transmission?

You can find a donor TH-200-4R in one of these cars: The transmission identification is on a plate on the right side of the case towards the tailshaft. This ID plate is attached by one rivet. The plate will have a two- or three-letter transmission code in large letters.

Does a 200r4 have a TV cable?

The TV cable on the 700-R4 and 200-4R transmissions controls line pressure, shift points, shift feel, part throttle downshifts, and detent (full throttle) downshifts.

How can you tell a 200 R4 transmission?

How strong is a 200r4 transmission?

General Motors produced the 200-4R automatic transmission from 1980 to the early 1990’s. The 200-R4 powered the 1983 Buick Regal Grand National, where it proved sturdy enough to handle performance ratings of 190 horsepower and 275 pound-feet of torque.

How to install a 700R4 and 2004R cable?

700R4 & 2004R Installation Instructions Step 1: Obtain a cable that is designed for use with the 700R4/2004R transmission. The TH-350 and older TH-200 cables… Step 2: With the carburetor/throttle body end of the TV Cable disconnected, pull the link out of the transmission and… Step 3: Install a

What kind of transmission fluid do I need for a GM 200-4R?

IF YOU ARE INSTALLING A 200-4R LEVEL 3 OR 4 (FOR DRAG RACING), OVER FILL TRANSMISSION PAN BY 1 ½ QUARTS.  Use a good, high quality automatic transmission fluid, such as Castrol Dexron VI.  Please do not use any purple ATF, such as B&M Trick Shift, this will void your warranty.

Can a 700R4 be used in place of a TH-400?

If you are retrofitting your TRANSDEPOT 700R4/2004R transmission in place of a different model transmission (i.e. TH-350 or TH-400) it is imperative that you follow the TV Cable bracket fabrication instructions. If your TRANSDEPOT 700R4/2004R is replacing an original 700R4/2004R then skip to Step 2.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top