How do I factory reset my HP Laserjet 4700?

How do I factory reset my HP Laserjet 4700?

To Perform a Cold Reset via Control Panel:

1. Turn the printer off…
2. Turn the printer on.
3. When you see the memory count begin, Press and hold the √ key.
4. When all three LED lights remain lit, release the √ key.
5. If a bootloader password has been set, a prompt to enter the password will be displayed in the control panel.

How do I calibrate my HP laser printer?

Calibrate the product to align the colors

1. On the product control panel, press the Setup button.
2. Open the following menus: System Setup. Print Quality. Calibrate Color.
3. Select the Calibrate Now option, and then press the OK button.

How do I fix HP 49 service error?

Turn the printer off, unplug the printer from the network/computer, clear any pending jobs from the print queue (on the computer), then reboot the printer to make the 49 error disappear. Then you can reconnect the network/computer cable and try printing again.

Why is HP printer not printing?

Make sure the correct ink or toner cartridges are installed, and that the printer has sufficient ink or toner for your print job. Make sure no error messages or blinking lights display on the printer control panel. Resolve any errors before you use the printer. Restart the printer to clear any error states.

What does error code 49 mean?

A 49 error typically occurs when the printer attempts to perform an action that the firmware is not capable of performing or might not be designed to handle, for example: Printing files that include unsupported printer commands. Interfacing with a third-party solution that was not designed to work with the printer.

Is the transfer kit on the HP LaserJet 4700 sold out?

The transfer kit in our Laserjet 4700 is coming to the end of its life. I have ordered a replacement, but nobody has them. Even the HP web store is sold out.

How can I test my HP LaserJet 4700?

To test just go to the diagnostics menu, choose the item disable cartridge check and when the printer says ready, diagnostics mode, open the toner door and remove the toner that has the lines and then close and print some test pages. If the lines are now gone, then that toner is what is the problem.

What should I do if I get an error code on my HP LaserJet?

The maintenance error message will need to be reset or clear the maintenance count. Once you see error message Printer Maintnenance error message displayed on HP LaserJet 4000/4050, 4200/4300, 4240/4250/4350 and P4014/P4015/P4515 you need to replace the maintenance kit and reset the maintenance count on your LaserJet printer.

What does service code 49.4c03 mean on a HP printer?

For example, they could appear as 49.4C03 SERVICE ERROR HP LaserJet 4000, 4050 and 4100. 50.X FUSER ERROR a fuser error has occurred. X Description: hp 4000 50.1 is Low Fuser temperature 50.2 is Fuser warm up service 50.3 is High Fuser temperature 50.4 is Low/Bad line voltage (Printer hooked up to UPS) 50.5 is Inconsistent Fuser.