What is a photoconductor on a Lexmark printer?

What is a photoconductor on a Lexmark printer?

The photoconductive drum consists of a photoconductor kit, also called a drum. This is the part of the laser printer that takes the image of the laser. The drum takes the toner particles from the cartridge and then transfers them to the paper.

How long does a photoconductor last?

30,000
The photoconductor kit is rated to last 30,000 single-sided pages (at approximately 5% coverage). The toner cartridge has to be replaced more frequently.

What is a photoconductor in a printer?

The photoconductor kit contains a colored drum that snaps into the toner cartridge. The drum is what actually makes the image on the page. When light from the printer’s laser or light-emitting diode array strikes the drum, it causes it to take on a charge.

What is a computer kit printer?

The Photoconductor (PC) kit, also known as the imaging drum, is a consumable item which must be replaced every 30,000 pages. Replace the imaging drum and reset the life counter.

Is photoconductor same as drum?

A photoconductor kit or a photo developer unit is, although in some ways a bit different, it’s ultimately the same for brands such as Lexmark as what’s called a drum unit for other brands, the latter term is much more common.

How do you change the units of a photoconductor?

Place no objects on the front or inner cover.

1. Turn off the power, and then unplug the power cable.
2. Carefully open the left cover.
3. Turn the two green levers counterclockwise ( ), and then slowly open the inner cover ( ).
4. Remove the photo conductor unit you want to replace.

How often do you need to replace the drum on a laser printer?

three to four
As a general rule, you should always replace your drum unit after using three to four toner cartridges just to be safe. Page yields are also calculated, with only 5% of the page being filled as an entire page.

Is a photoconductor unit the same as a drum?

What is photoconductor physics?

Photoconductivity is an optical and electrical phenomenon in which a material becomes more electrically conductive due to the absorption of electromagnetic radiation such as visible light, ultraviolet light, infrared light, or gamma radiation.

What is the difference between toner and imaging unit?

The toner cartridge contains several components including the color pigment used to create letters and images. The imaging drum is the unit that transfers the toner to paper by following the principles of electrophotography. Not all laser printer models require both toner cartridge and imaging drums.

How do I change the Lexmark photoconductor?

Replacing a photoconductor unit

1. Open door A.
2. Remove the waste toner bottle.
3. Remove the imaging unit.
4. Remove the photoconductor unit.
5. Unpack the new photoconductor unit, and then remove the packing material.
6. Insert the new photoconductor unit.
7. Insert the imaging unit.
8. Insert the waste toner bottle.

What is photo conductor unit?

The drum unit is what holds the toner cartridge in some printer models such as Brother (photoconductor kit for Lexmark), it’s about as long as a forearm. It transfers the toner to the paper.

What does a Lexmark E250D mono laser printer do?

Surprisingly affordable for a duplex-integrated printer, Lexmark’s E250d mono laser lets you halve paper waste, save money and print faster – at up to 30 ppm (28 ppm A4). Built-in duplex printing is standard. By printing on both sides of the page, you can drive costs down and reduce paper consumption.

When to replace the photoconductor on a Lexmark printer?

A Photoconductor (PC) Life Warning or a Replace Photoconductor message on the printer screen indicates that the photoconductor unit in the printer is near or past its expected life rating of 30,000 single-sided pages. You will need to replace the photoconductor unit inside the printer when you see this message.

What is Lexmark’s maximum monthly duty cycle 2?

2 “Maximum Monthly Duty Cycle” is defined as the maximum number of pages a device could deliver in a month using a multishift operation. This metric provides a comparison of robustness in relation to other Lexmark printers and MFPs.

How do I remove toner cartridge from Lexmark printer?

Press the button on the left-hand side of the printer and open the front door. Remove the print cartridge assembly. Grasp the toner cartridge handle and pull up and out. Note: Do not press the button on the print cartridge assembly. Place the print cartridge assembly on a flat, clean surface.