What is the best brand of dimmer switch?

What is the best brand of dimmer switch?

The 7 Best Dimmer Switches of 2021

• Best Overall: Lutron Toggler 3-Way Dimmer at Lowe’s.
• Best Budget: GE Slide Dimmer Wall Switch at Amazon.
• Best Smart: Kasa Smart Dimmer Switch HS220 at Amazon.
• Best for Bedrooms: Lutron Maestro LED+ Dimmer Switch at Amazon.
• Best for LED:
• Best for CFL:
• Best Plug-in:

Can you put a dimming switch on any light?

A dimmer switch can be installed anywhere that an existing on or off switch is in place. Replacing the current toggle switch with a dimmer switch will allow you to change the lights’ brightness, so long as you are using a light bulb that is compatible with the dimmer you have chosen.

What are three types of dimmers?

The three main types of dimmer switches are resistive, fluorescent, and inductive dimmers. Resistive dimmers are used for lamps with a filament, inductive dimmers for LED lights, and fluorescent dimmers for fluorescent lights.

Can you get an intermediate dimmer switch?

This can be extended to four or more switches. With these two products, you have the flexibility to install intermediate and 2-way switches that look like dimmers. Only one of these switches can be a dimmer but you can use VARILIGHT touch and remote dimmers, V-Pro IR and Eclique2, to dim from all switch locations.

How do I know which dimmer switch to buy?

Choose a dimmer with a wattage rating that meets or exceeds the total wattage of all the light bulbs the dimmer will control. For example, if the dimmer controls a fixture with ten 75-watt bulbs, you need a dimmer rated for 750 watts or higher.

What does leading edge dimmer mean?

Leading-edge dimmer switches are cheaper and simpler than trailing-edge, and were used originally to dim incandescent and halogen bulbs or wirewound magnetic transformers. They use a ‘TRIAC’ (Triode for Alternating Current) switch to control power, and are sometimes called TRIAC dimmers.

What happens if you use non-dimmable bulb in a dimmer?

If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.

How do I know what dimmer switch to buy?

How do I know what type of dimmer I have?

Determine the number of switches that control the light group. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a 3-way dimmer. Then look at the bulb type you are going to be using and pick the right type of dimmer.

What is an intelligent dimmer switch?

iQ Intelligent Remote/Touch Dimmer Switches incorporate the following advanced features Suitable for dimming Low Voltage Halogen lamps via good quality, fully dimmable electronic transformers. Soft Start, which gradually increases the light output from the load over 1 to 3 seconds after switch on.

How do I know what wattage my dimmer switch is?

Wattage rating is usually on a sticker on the light fixture.

1. Multiply the number of fixtures by the wattage rating of each fixture.
2. Multiply the result by 125 % (continuous load).
3. Round up to the next dimmer wattage rating.