How much air does a needle scaler use?
Needle scaling. The needle scaler allows you to restore metal surfaces to shiny smoothness in seconds, and it only requires 8 to 16 cfm at 90 psi.
How do you oil a needle scaler?
Place 4 or 5 drops of air tool oil into air inlet; re-connect air and run tool for a few seconds to distribute the oil. Disconnect air. Avoid storing the needle scaler in very humid locations which promotes rusting of internal mechanisms. Always oil the tool and disconnect air hose before storage.
What does a Air Needle Scaler do?
A needle scaler (or needle gun scaler) is a tool that usually relies on a constant supply of compressed air. On the end of the piston there are long chisel needles that are forced backwards and forwards by the pressure of the air. A needle scaler is capable of rapidly removing and chipping away any debris.
How does an air needle work?
Many models use compressed air, although electrical needle-guns do exist. In a pneumatic unit, compressed air forces a piston forwards and backwards. This movement causes the needles to move back and forth against the work surface.
What does an air needle scaler do?
Use this air needle scaler to power off weld flux, rust, scale, paint, cement and other residues. The air needle scaler is ideal for use with hard, durable, irregular surfaces that can withstand a heavy scouring.
Are needle scalers any good?
Needle scaler guns are wonderful tools for quickly chipping off paint, scale, slag, and rust. But all that material has to go somewhere while the scaler is in use. Make sure that debris doesn’t go in your eyes by using a good pair of safety glasses.
Can you use a needle scaler on concrete?
While needle scalers are often used on metal to remove rust or caked on grease and oil, they’re also highly effective on concrete and stone. Using a needle scaler on concrete allows you to get in difficult to reach areas or places where a larger machine can’t reach.
How do needle scalers work?
There is a piston that is inside the needle scaler that moves due to a jet of compressed air that is passed inside the needle gun. When the piston moves in this manner, the fine needle like chisels that are attached to the mouth of the gun begin to move and chip away at the debris.
Can you over oil an air tool?
You should put a couple of drops of pneumatic tool oil into the tool at the end of a work-day as the extra oil will protect its interior metal components from any residual moisture accumulated during the day. It is very important to not over-lubricate your pneumatic tools as this may also damage them.
What kind of hammer does von Arx use?
You will always find the right Von Arx-Chisel Hammer to handle every job. Available with different chisels. Quickly removes laitance, projections, encrustation, scale deposits, colour, rust, smoothes roughening, etc. You will always find the right Von Arx-Pneumatic Scabbler to handle every job.
What’s the name of the new von Arx machine?
With workers health in mind and focus Von Arx has developed an updated version on model FR200. New machine is called FR200 Genus! Genus is Latin Von Arx proud, dedicated and hardworking team in Plovdiv always has our customers in focus.
What makes a von Arx shaver so good?
The vibration absorption system and easy handling make the job more pleasant and efficient. With our shavers the surface is carefully „grinded off“ instead of chipping it away. These machines runs calmly and produces a smooth surface.
Why are von Arx and Decovan machines partners?
Decovan Machines and Von Arx have a strong partnership which stands for over 50 consecutive years. The main reason, spoken as a distributor, is off course the high quality of the products throughout these years.