How do I fix my DVD drive not reading?

How do I fix my DVD drive not reading?

Boot to the Windows 10 desktop, then launch Device Manager by pressing Windows key + X and clicking Device Manager. Expand DVD/CD-ROM drives, right-click the optical drive listed, then click Uninstall. Exit Device Manager then restart your computer. Windows 10 will detect the drive then reinstall it.

Why is my DVD drive not reading DVDs?

A dirty or scratched disc surface is the most common reason for a CD/DVD issue when inserted into a computer. Check the disc for damage and confirm that the disc is compatible with your computer. Clean the disc and check for damage: Clean any dust or smudges from the disc with filtered water and a lint free cloth.

How do you diagnose DVD drive problems?

Place an optical disc in your DVD-ROM. Click on “Start,” and then “My Computer” to see if your DVD drive is recognized by the computer. If you do not see a DVD drive, it is malfunctioning.

How do I reset my DVD drive?

How to Reset a CD/DVD Drive

1. Restart your computer. After it starts to back up, push the eject button on the DVD player if it was not working properly.
2. Find a small opening below the eject button on the outside of the drive.
3. Clean the laser lens on the DVD drive with the appropriate cleaner and a lint-free cloth.

Why won’t my CD player read discs?

Clean your CDs before and after playing them. Although the compact disc has a much longer lifespan than does something like a cassette tape, it can be more fragile. Scratches, dust or other damage to the data side of the CD will cause many CD players to fail to read the CD or cause the CD to skip.

How do you fix a CD drive that won’t read discs?

Update Your CD Drivers

1. From the Start menu, search for Device Manager.
2. Find your DVD/CD-ROM drivers tab.
3. Right-click your CD Drive from DVD/CD-ROM and select Properties.
4. Click the Driver tab and select Update Driver. Follow the prompts.

Why my CD is not detected?

Try testing the CD-ROM in Safe Mode. If the CD-ROM works in Safe Mode but not in normal Windows, a running program is causing the issue, or the drivers are corrupt. Open Device Manager, highlight and remove the CD-ROM by pressing the delete key. Windows should then detect the CD-ROM and reinstall it.

How do you reset a disk drive?

Insert the Windows 7 DVD into the optical drive. Click “Start,” point to the arrow to the right of “Shut Down,” and select “Restart” from the options.

What causes a DVD player to stop working?

Check if the optical disc drive is dirty or broken. Dust is always the culprit for most DVD player not read/load errors. DVD player not working might be a sign that the disc tray, tray motor or laser is worn out. To fix any of the DVD hardware, you need to open the housing and check the inside with special tools.

How do you clean a slot loading CD player?

How To Clean A Slot Loading CD Player?

1. Step 1: Confirm there is no CD in your player.
2. Step 2: Blow the dust away.
3. Step 3: Take the lens cover out.
4. Step 4: Choose the cleaner.
5. Step 5: Apply isopropyl alcohol on the lens.
6. Step 6: Wait for the lens to dry.
7. Solution 1: Use cleaner discs.
8. Solution 2: Dismantle the player.

Why does my DVD player keep saying error disc?

The message DISC ERR is usually displayed when the unit ca see the disc but not play the disc. This usually occurs when the disc is scratched or dirty. The message NO DiSC is displayed when the unit simply can not read or detect the disc at all. This can also occur if the disc is scratched or dirty.

How do I manually reset my hard drive?

How to wipe a Windows hard drive

1. Click the Start button and then click “Settings.”
2. In the Settings window, click “Update & Security.”
3. In the pane on the left, click “Recovery.”
4. In the Reset this PC section of the window, click “Get started.”
5. In the Reset this PC window, click “Remove everything.”

What would cause a DVD drive not to work?

Mechanical problems – Though not that common with DVD drives, but it is worth not ruling it out. Dirt, dried up lubrication, damaged parts are the main cause of mechanical problems that is associated with DVDs. When such problems occur you are likely to witness erratic problems or total failure.

Why is the DVD drive not working?

A CD-ROM or other disc drive that is not working can be caused by a loose interface connection, drivers not loading properly, virus, or the drive or CD attempting to be read being dirty. The most common cause of a CD-ROM drive to stop working is bad or corrupt drivers or a confliction between another running program.

How do you activate a DVD drive?

Click the “Start” button in the bottom left corner of the computer screen and then select “My Computer.”. Right-click on the DVD drive. It will typically have “DVD” in the name. If you’re unsure which drive is the DVD drive, simply insert a DVD, and you’ll see the name of the DVD appear on the drive.

What can you do with at DVD/RW drive?

Part 2: What Can I Do with DVD-RW Mount ISO files as virtual drives. Sometimes, you must have the need to back up some games, videos, or pictures to ISO which will save more space on your computer. Burn your favorite movies to a DVD RW disc. Store the Wikipedia data on a DVD RW disc. Rip movies from the disc to digital. Backup personal data on a DVD RW disc.