Does Mercedes C Class have folding rear seats?

Does Mercedes C Class have folding rear seats?

Seat folding and flexibility The C-Class’s rear seat has a useful 40/20/40 split-and-fold configuration as standard.

How do you take the back seat out of a Mercedes A Class?

Pull the lever at the base of the seat nearest the door and the seat (now folded) will flip forward. To remove, pull the lever directly underneath the seat, and the seat should lift out.

Do the back seats go down in a Mercedes C Class Coupe?

Mercedes C-Class Coupe boot space On the plus side, the C-Class Coupe’s rear seats split and fold, which is great for those trips to IKEA or the DIY store.

How do you open the trunk on a 1999 Mercedes?

How to manually unlock the trunk of a Mercedes-Benz

1. Remove the metal key from the key fob. You will need to slide the locking tab with your thumb and pull out the metal key.
2. Insert the key into the trunk lock cylinder.
3. Turn the key until you hear the trunk pop open.

How do you remove a seat from a Mercedes Benz?

Tilt the seat back and remove the three electrical connectors from the seat module. You can now carefully remove the seat from the car. The rear panel is held in place by two T20 Torx screws. Unscrew them and slip the panel down and off.

Can a socket wrench be used to remove a Mercedes seat?

Mercedes Seat Removal. The seats in a Mercedes are bolted to the floorboard, and with a socket wrench it will only take a very short amount of time to remove them. The back seat is simpler to remove as it just sits in place. The back portion is held on by clips and this makes the seat removal a quick and simple process.

How to remove the backrest on a Mercedes Benz?

Remove the two 15mm nuts holding the center rear backrest along with the 10mm screws on each side. Move to the trunk and remove the two plastic covers over the backrest release catch. You have to use a flathead screwdriver and lever the release (red arrow) away from release stop. While you lever, push seat back toward interior of vehicle.

Where are the bolts on a Mercedes seat?

The seat has four bolts that brace it to the floorboard. The bolts are located at each corner of the seat. Unscrew the back two bolts with a socket wrench. The seat will now need to be slid all the way back to access the front bolts. Undo the front bolts and place them out of the way.