What grease is best for wheel bearings?
Table of contents
- 1: Editor’s Pick: Royal Purple Ultra Performance Grease.
- Best for Performance: Allstar Timken High-Temp Synthetic Wheel Bearing Grease.
- 3: Best on a Budget: Sta-Lube New Generation Wheel Bearing Grease.
- Lucas Oil Red ‘N’ Tacky Grease.
- Mag 1 High-Temp Disc Brake Wheel Bearing Grease.
What type of grease is wheel bearing grease?
For high-temperature components, such as wheel bearings, a high-temperature silicone-based grease is required. These greases are designed to hold stable under high temps and against the elements commonly seen in wheel bearings.
Is red and tacky grease good for wheel bearings?
Red N Tacky has a red Lithium Complex Base that is red in color, forming an effective seal to minimize bearing and hub contamination, with resistance to water washout on boat trailers. This Red grease is ideal for use with all trailer applications.
Is Lithium grease better than regular grease?
Lithium-complex greases generally possess good stability, high-temperature characteristics and water-resistance properties. The dropping point and high-temperature life of calcium-sulfonate greases are also better, allowing these greases to be used at higher temperatures.
Can I use lithium grease for wheel bearings?
The LubriMatic White Lithium Grease, part # L11350, can be used on your wheel bearings. If you want to remove it, you will just need to wipe the parts down as best as you can, and then you can use some brake cleaner to further clean the bearings.
Is Marine grease better than regular grease?
Marine grease has a tough job. Marine grease is typically formulated with tackifiers that give it an affinity for the surface or make it more “surface active.” Basically, it makes grease stick better.
Which is better silicone or lithium grease?
Because lithium grease is petroleum based, it’s not recommended for use around plastics and rubber where it’ll cause these to prematurely fail. Silicone grease, on the other hand, works better in low temperature, low stress applications around plastics and rubber.
How do I choose the right grease?
Top tips for selecting the right grease
- Choose the right grease for the application. Greases have varying priorities to ensure that they can best operate under certain conditions.
- Select the right base oil viscosity.
- Do not over-grease or under-grease.
- Avoid incompatibility.
- Consider using greases with synthetic base oils.
How do you choose grease for bearings?
The most important property of any lubricant is viscosity. A common mistake when selecting a grease is to confuse the grease consistency with the base oil viscosity. Because the majority of grease-lubricated applications are element bearings, one should consider viscosity selection for those applications.
Is it OK to use marine grease on wheel bearings?
Marine grease also contains additives such as corrosion inhibitors for both ferrous and non-ferrous metals to protect against rust, corrosion and pitting. As a rule, marine grease should be used in any marine application including trailer wheel bearings, steering assemblies or any other parts that require grease.