What vehicles came with a 241C transfer case?
The NP241C transfer case was manufactured by the New Process Gear Division of Chrysler. The case was installed in Chevy Blazers, Suburbans and Tahoes from 1987 through 1998.
Is the NP241 transfer case any good?
Low range ratio is 2.72:1 using a six-pinion planetary assembly. Versions were built for mechanical speedometer cables and for electronic vehicle speed sensors. The NP241 is a solid, reliable transfer case and superior to the NP203 it replaced.
Will a 241C bolt to a 4l60e?
Re: 4L60E/241C info As far as I know (I’m not a 4×4 guy, but I pick up stuff along the way), you can start with a 2wd 4l60e if your going to the 241 tc, since you need to change the output shaft either way. If you stuck with the 205, the starting with a 4wd 4l60e would be easier because you could just bolt it up.
What is a NP241 transfer case?
The NP241 transfer case was in service from 1989-1999. It features an aluminum casing and is driven by a chain. It is a popular model, being found in numerous applications including the Chevrolet Blazer, Suburban, and Tahoe, as well as the 1500, 2500, 3500, and Van.
What oil goes in a NP241 transfer case?
Dexron III
| CHRYSLER / DODGE TRANSFER CASES | |
|---|---|
| Transfer Case Model | Fluid Type |
| NP233 | ATF (Dexron III or higher) |
| NP241 | ATF (Dexron III or higher) |
| NP242 | ATF (Dexron III or higher) |
Which is better NP205 or np208?
Like jason said, the NP205 is regarded as the better of the 3 that gm used on these trucks. Some advantages of the 205 is that its gear driven and has a cast iron case, which also means its heavier. The 208 is chain driven, has an aluminum case and also has a lower low gear range than the 205.
How much HP can a NP241 handle?
1500+hp. You’ll be fine with a 241.
How much fluid does a 241c transfer case hold?
Manual says 3.08 liters or 3.25 quarts for 241 HD.
What transfer case goes on a 4L60E?
NP246 Transfer Case- NP8 Fits 98-02 with 4L60E (27 spline)- Bulldog Tough OEM Quality Replacement Unit From The Gear Shop.
How much fluid goes in a 241c transfer case?
duke1n. Manual says 3.08 liters or 3.25 quarts for 241 HD.
How Much ATF does a NP241 take?
The NP241 hold about 2.5 quarts…the NP241HD holds a lot more…
When did the Process 241 series transfer case come out?
The New Process 241 series transfer case was installed in Dodge and Chevrolet applications starting in 1987. Jeep installed them in 2003-2005, these transfer cases are part time Dodge NP241D Transfer Case Parts for four wheel drive with shift positions 4HI – 2HI – N – 4L.
When did the np241c transfer case come out?
We can, in some cases, provide good used parts; these are good take out parts that are inspected. Chevrolet NP241C Transfer Case Parts and top of the line overhaul kits. The New Process 241 series transfer case was installed in Dodge and Chevrolet applications starting in 1987.
Is the NP231 a part time transfer case?
The NP231 is 1:1 direct drive in high range, and use planetary reduction gears for low range with a ratio of 2.72:1. This unit is a chain driven front output, The NP 241 is a part-time transfer case and is manual shifted. Give us a call 800-216-1632 and let us help you save time and money!
What kind of fluid to use in NP241 transfer case?
If you have purchased your vehicle used the very first order of business is to double check the tire diameters. Used car dealers may have mismatched the tires to make the sale. Mismatched tires will cause the NP241 transfer case to fail. Recommended fluid for the NP241 transfer case is automatic transmission fluid (ATF).