What is a Chevy R30?

What is a Chevy R30?

R30 = “1 Ton” 2wd (1987-1988)

How much horsepower does a 1988 Chevy 350 have?

1988. In 1988, the engine’s horsepower (hp) ranged from a low of 185 hp, in the G30 and C/K3500, to a high of 210 hp in the Suburban. The torque rating had a low of 285 foot-lbs., in the G30 and C/K3500, and a high of 300 foot-lbs.

What engine does a 1988 Chevy truck have?

The 1988 Chevy Silverado had four engine options: 210-horsepower (hp) 5-liter or 5.7-liter V-8, 230-hp 7.4-liter V-8 and 6.2-liter diesel V-8. Only the 2500 and 3500 models were equipped with the 7.4-liter V-8.

What is the best year for a square body Chevy?

The slang name is “square-body,” and there are a lot of good reasons to buy a 1973 to 1987 Chevy C10 or GMC truck.

Is a C20 A 3/4 ton truck?

Chevy C10 and C20 Differences. The obvious difference between the C10 and the C20 is that one is a half-ton and the other a three-quarter-ton truck. These classifications don’t refer to their respective curb weights, but rather to their payload capacity.

What does Chevy C K stand for?

A C (conventional) in front of the series number designates two-wheel rear drive while a K designates four-wheel drive.

How do you get a 350 hp 350?

No matter what application your Chevy 350 motor is in, a few simple steps can get you more better performance and higher horsepower.

1. Modify your air intake.
2. Modify your exhaust.
3. Change your camshafts and valve train.
4. Purchase new cylinder heads, or have yours ported and polished.
5. Have your motor rebuilt and blueprinted.

How much HP can you get out of a 350?

a typical 350 Chevy can make upwards of 350 – 375 HP before you exceed the reliability of the components. For a big block with the same stock components it can make in the area of about 400 to 475 or so HP and handle upwards of about 500 HP before you exceed the reliability of the stock cast pistons.

What’s the difference between C1500 and K1500?

The main difference between the Chevy C1500 model and K1500 model is that the C1500 has two-wheel drive and the K1500 has four-wheel drive. They also differ in their lug patterns, front axle inclusion, and independent suspension. Aside from these differences, they are nearly identical.

How much horsepower does a 350 4 bolt main have?

Stock 350. The four-bolt main 350 with two-barrel carburetor came with 8.5:1 compression, and was good for 145 horsepower at 3,800 rpm and 250 foot-pounds of torque at 2,200 rpm. 350s equipped with four-barrel Quadrajet carburetors produced 170 horsepower at 3,800 rpm and 255 foot-pounds of torque at 2,800 rpm.

Why are square body Chevys so popular?

With its dual-wheel rear axle and severe-duty running gear, it was ideal for construction work and for serious towing. (Back in the day, these rigs were especially popular with racers—they were perfect for pulling fifth-wheel race car trailers.)

What kind of truck engine was there in 1988?

The volume of engines produced, vast parts availability and relatively cheap cost made the transplant extremely attractive. In 1988 the engine was typically found in a long list of Chevrolet pickup trucks, Vans and SUVs, including the popular C3500 truck series, as well as the GMC Suburban line of full-size sport utility vehicles.

What was the curb weight of a 1988 Chevy Silverado?

Depending on the engine, transmission and selected options, the 1988 Silverado had a curb weight of between 3,869 and 5,371 lbs.

What kind of engine does a 1988 Chevy 454 have?

Specifications for the 1988 454 RV Engine. Specifications. This 7.4-liter V-8 is configured with a 4.251-inch (108 mm) bore and 4-inch (102 mm) stroke. Horsepower output varied slightly and was 454. A popular choice for recreation vehicles, the Chevy 454 found its home in motor-homes, although