How do I program my universal remote to my converter box?

How do I program my universal remote to my converter box?

Manually turn on the component you wish to program the remote to operate. Find the four-digit code for your brand of TV, VCR, DVD, satellite receiver, cable box, or digital TV converter in the enclosed code lists. Press and hold the CODE SEARCH key until the indicator light turns on. Release the CODE SEARCH key.

Can I use a universal remote on my converter box?

A: You can use your universal remote with almost anything connected to your TV. You can control your Blu-ray, DVD, VCR,DVR, cable box, satellite, digital converter box, streaming devices and more.

Why is my digital converter box not working?

If you are having problems, check for loose or corroded wiring or broken antenna elements. Also check the direction the antenna is pointed. Try to keep the length of wire between your antenna and digital-to-analog converter box or digital television as short as possible for best reception.

How do I program my directv remote to my digital stream converter box?

How to Program a DirecTV Remote to a Digital Stream Converter Box

1. Manually turn on the Digital Stream converter box.
2. Slide the Mode switch, located at the top of the DIRECTV remote control, to “AV2.”
3. Press and hold the “Mute” and “Select” buttons on the DIRECTV remote control until the “AV2” LED light blinks twice.

How do I program my digital converter box to my TV?

Hooking Up a Digital Converter Box:

1. Unplug Your TV. Turn off your television and unplug your TV before you begin.
2. Connect Your Antenna.
3. Choose Your Connector Type.
4. Connect the Box to the TV.
5. Plug In Your TV and Converter Box.
6. Tune Your TV to the Right Channel or Input.
7. Search for Channels.

How do you program a Zenith converter box remote?

Press and hold down the “Aux” button on the remote until the indicator light flashes, then remains lit. Enter one of these three-digit codes using the number pad on the remote: 254, 357, 454, 457, 557, 657, 757, 857, 955 or 957. When a correct code is entered, the indicator light will turn off.

How do I connect my digital converter box to my TV?

Using the coaxial wire that comes with your Converter Box, plug one end into the “Out To TV (RF)” port on the Converter Box. Plug the other end into the “Antenna In (RF)” port on your TV. Plug the power cords on your Converter Box and TV into a power outlet, and turn on your TV and Converter Box.