How do I turn on my Xerox printer?

How do I turn on my Xerox printer?

To Power On the Printer:

1. Open the Front Cover, press the power switch to the On (I) position, and then close the cover.
2. Press the power switch below the Control Panel to the On (I) position. NOTE: When the optional Office Finisher LX is installed, the secondary power switch is behing a clear plastic door.

How do I turn on my Xerox WorkCentre 7225?

Press the main Power Switch (behind the Front Cover) to the On position. Wait for at least 15 seconds. Press the Power Switch on the Lower Center Tray to the On position.

How do I factory reset my Xerox WorkCentre 5330?

From the powered on state, hold down the “0” button for six seconds and then press the “Start” button while still holding the “0” button. The machine will prompt you for a password. Enter the default access number “6789” and press “Confirm.” The display will acknowledge that you are now in diagnostic mode.

How do I reset my Xerox WorkCentre 7845?

Perform a Software Reset

1. Press the Log In/Out button on the Control Panel.
2. Login as the device Administrator (Default Username: admin, Default Password: 1111).
3. Press the [Machine Status] button on the Control Panel.
4. Select the [Tools] tab on Touch Screen.
5. Select the [Troubleshooting] button.
6. Select the [Resets] button.

Where is the power switch on a Xerox printer?

The main power switch located behind the Front Door controls the main power to the printer. The secondary power switch on the top of the printer controls power to the printer electronic components, and initiates a software-controlled shutdown when turned off.

How do I turn off my Xerox printer?

Power off the printer.

1. Press the power switch below the Control Panel to the off position. A warning message will be displayed on the Touch Screen that the printer is powering off.
2. Open the Front Cover, press the power switch to the off position, and then close the cover.

How do I add an email address to my Xerox workcentre 7225?

Press Start. For Email, touch New Recipient, then enter the address using the touch screen keypad. Touch +Add to add addresses to the list, then touch Close. email addresses.

How do I reboot my Xerox?

Restart (Reboot) the Printer

1. Login as System Administrator at the Control Panel.
2. At the printer control panel, press the Machine Status button, then touch the Tools tab.
3. Touch Troubleshooting.
4. Touch Resets.
5. Touch Software Resets.
6. For Reset Options, select the type of reset that you want.
7. Touch Reset.

How do I reset my Xerox machine?

Reset the Printer Settings to Factory Defaults

1. At the printer control panel, log in as administrator, then press the Home button.
2. Touch Device > Resets > Reset to Factory Defaults.
3. At the prompt, touch Reset.
4. When the process is complete, the printer restarts automatically.

How do I reset my Xerox workcentre?

Reset the Printer to Factory Defaults

1. At the printer control panel, log in as administrator. At the printer control panel, press the Log In button. Touch or type admin.
2. Press the Home button.
3. Touch Device > Resets.
4. Touch Reset to Factory Defaults.
5. At the confirmation message, touch Reset.

How do I factory reset my Xerox 3345?

To restore your printer to factory default settings, perform the following steps:

1. In Xerox® CentreWare® Internet Services, click Status→General.
2. To restore the original network default settings, click Network Factory Default.
3. To confirm, click OK.

How do you turn off a copier printer?

Press the power switch located on the right side of the top front panel to the off position. Internal processing will take place before the printer shuts off.