Why is my brake light on in my Subaru?
The brake system warning light flashes when the electronic parking brake system is malfunctioning. If the warning light flashes, promptly park in a safe location as soon as possible and contact your SUBARU dealer.
What does it mean when the word brake appears on the dashboard?
The simplest (and oldest) light on your dashboard – the one most people refer to when they mention a brake system warning light – is the BRAKE light. When this light comes on, it means one of two things. Either the hydraulic fluid (brake fluid) in the master cylinder is low, or the parking brake is engaged.
How do you reset the dash lights on a Subaru?
To reset the oil level warning or maintenance light in your 2010 subaru outback vehicle, turn the ignition key to the “on” position and depress the gas pedal slowly three times. Release and start your vehicle and oil light should indicate a reset.
How do I turn off the brake light?
How to Reset a Brake Warning Light
- Find your vehicle’s Assembly Line Diagnostic Link port.
- Attach an OBD1 or 2 scanner to this port and turn the key in the ignition but do not start the engine.
- Press “OK” and read the code.
- Service the brakes according to the problem diagnosed by the code.
Is it safe to drive with brake light on?
Driving with the Brake Warning Light on should not be done as this is dangerous. It means your brakes are not working properly and need to be repaired as soon as possible.
How do you disconnect a brake light switch?
Part 2 of 3: Remove the brake switch
- Materials Needed.
- Step 1: Disconnect the battery.
- Step 2: Find the switch.
- Step 3: Remove the wiring connector from the switch.
- Step 4a: Remove a newer style switch.
- Step 4b: Remove an older style switch.
- Step 1: Align the switch and the socket holes.
- Step 2: Lock the switch.
How do you reset the dashboard on a Subaru Outback?
What causes brake lights to stay on?
Slightly engage the parking brake
Why do my brake lights stay on when the car is off?
Sometimes, as the brake light pedal stopper pad wears out, it can crack and fall apart. A missing stopper pad is most likely the reason why your brake lights stay on when the car is turned off.
Why does the brake warning light stay on?
Here are some things to look for when you see that your Brake Warning light has been turned on: One of the main reasons the Brake Warning Light comes on is a brake needs to be replaced. Low brake fluid or worn brake pads are other reasons your Brake Warning Light may come on. Leaking brakes are another reason the Brake Warning Light may come on.
What are the warning lights on my Subaru?
The brake system warning light flashes when the electronic parking brake system is malfunctioning. If the warning light flashes, promptly park in a safe location as soon as possible and contact your SUBARU dealer. The brake system warning light remains illuminated when the parking brake cannot be released even if the parking brake switch is pulled.