What are LVL sizes?
LVL is available in lengths up to 24.4 m (80 ft), while more common lengths are 14.6 m (48 ft), 17 m (56 ft), 18.3 m (60 ft) and 20.1 m (66 ft). LVL can easily be cut to length at the jobsite. All special cutting, notching or drilling should be done in accordance with manufacturer’s recommendations.
What does LVL beam stand for?
Laminated veneer lumber
Laminated veneer lumber (LVL) is one of the most widely used engineered wood products for constructional applications. It is a composite product manufactured from multiple thin layers of veneer that are aligned with the length of the finished lumber.
What is the difference between LVL 13 and LVL 15?
Visual differences include: LVL15 is 42mm wide whilst LVL13 is 45mm. LVL15 is generally clear whilst LVL13 is yellow. LVL Grades will always be clearly stamped on the side of the timber.
How far can LVL span?
Measure your total span between members and ensure that it is not greater than 60 feet. Because of transport limitations, the maximum standard length for manufactured beams is sixty feet.
What are LVLS made from?
LVL is a versatile engineered product and combines the best of modern process technology with the aesthetic beauty of natural wood. The main raw material used to produce LVL is wood veneer of various grades and it has been used structurally for several years in Northern America and in many European countries.
Is LVL cheaper than steel?
Cost To Install A Recessed Load-Bearing Beam Prices depend on how many underpinnings and piers are needed to support the steel beam’s weight. LVL beams are cheaper than steel beams; however, steel beams take up less space and are easier to install inside a ceiling.
What is a smart LVL?
SmartLVL is a Laminated Veneer Lumber (LVL) Engineered Wood Product that is naturally engineered for strength.
What is hySPAN LVL?
hySPAN® laminated veneer lumber (LVL) is easy to work with using traditional building tools and is clearly branded for easy identification and your guarantee of quality. hySPAN is suitable for all structural applications in residential, commercial, industrial and rural buildings subject to design verification.
What size LVL Do I need to span 16 feet?
How big of an LVL Do I need to span 16 feet? Joist spacing of 24 inches is allowed for spans between 16 to 20 feet using 2-inch by 10-inch lumber of these three grades.
What size beam do I need for a 16 ft span?
For 16 foot span, size of continuous beam for 2-3 storey residential building, using thumb rule, is about 9″×9″ in which beam width is 9″ and beam depth is 9″ providing with 2nos of 10mm bar at top, 2nos of 12mm bar at bottom and 2nos of 12mm crank bar of Fe500 with stirrup T8@6″C/C and M20 grade of concrete ratio (1: …