Is Jabber part of Cucm?

Is Jabber part of Cucm?

Cisco Jabber attempts to connect to Cisco Unified Communications Manager only after the mobile device is connected to an SSID that you list here, or one that the user selects in the client. Cisco Jabber must be able to reach Cisco Unified Communications Manager when it is connected to these SSIDs.

Where is the Cisco Jabber configuration file?

Background information: The jabber-config. xml file is used by the Cisco Jabber clients to alter default parameter settings. The jabber-config. xml file is located on the (CUCM) TFTP server and retrieved by the Cisco Jabber clients during startup.

How do I set up jabber on my laptop?

Install Jabber on a Computer

1. Request a Jabber account.
2. After your receive a confirmation that your account has been created, download the Jabber client software from Brown’s software catalog.
3. After downloading, double click the installer file and proceed through installation.
4. Open the Jabber Application.

How do I get Jabber-config XML from Cucm?

From CUOS, run the following command:

1. admin:file view tftp jabber-config.xml.
2. http://X.X.X.X:6970/jabber-config.xml.
3. %USERPROFILE%\AppData\Roaming\Cisco\Unified Communications\Jabber\CSF\Config.

How do I download Jabber-config XML from Cucm?

So what i prefer to do is do the following: -Download the original jabber-config. xml (download it straight off your CUCM) and use that as your working file. -Save the file (this will save it as en edited jabber-config.

How do you integrate Cucm with IM and presence?

Configuration on IM&Presence

1. Login to Cisco IM & Presence.
2. Go to Presence > Settings > Standard Configuration.
3. CUCM IM and Presence Trunk > Select SIP Trunk for Presence from Drop Down Menu.
4. Click on Save.

How does Cisco Jabber connect to Cisco Unified Communications Manager?

Cisco Jabber attempts to connect to Cisco Unified Communications Manager only after the mobile device is connected to an SSID that you list here, or one that the user selects in the client. Cisco Jabber must be able to reach Cisco Unified Communications Manager when it is connected to these SSIDs.

How to configure Jabber for Windows end user?

To configure the Jabber for Windows CUCM end user start by logging into the CUCM Administration web page and navigating to User Management > End User. From the Find and LIst Users menu search for and select the CUCM end user you wish to configure for Jabber for Windows.

How is the service profile used in Jabber?

The service profile is used to provide the Jabber client with CUCM UC service configuration.. Note: If you don’t assign a service profile to the CUCM end user then the user will automatically use the service profile that is set as the system default service profile. Next scroll down to the Device Information section.

How do I connect Cisco Jabber to my TFTP server?

Enter the IP address of your TFTP server (generally the IP address of your Cisco Unified Communications Manager server) and the Device Name (BOTXXXX) of the device you just added. Wait for a notice that the device is registered. The Cisco Jabber icon in the status bar turns black when the device is connected to Cisco Unified Communications Manager.