How far will a 10 gauge slug shoot?

How far will a 10 gauge slug shoot?

A slug also becomes increasingly inaccurate with distance; out to 100 yards, it drops approximately 5″ and has a maximum range of approximately 400 yards. In contrast, centerfire projectiles from rifles can travel miles. Shotgun slugs are best suited for uses over short ranges.

How powerful is a 10 gauge slug?

5rds – 10 Gauge Federal Power-Shok 3-1/2″ 1-3/4oz. HP Rifled Slug Ammo Details. This shell is loaded with a heavy 1-3/4 ounce rifled slug, which is compatible with smoothbore barrels. Loaded to a supersonic muzzle velocity of 1,280 fps, it easily reaches a 50 yard target with 2,000 ft lbs of energy.

How much does a shotgun slug drop at 100 yards?

(Slugs can drop more than 10 inches over 100 yards.) With practice and accurate ranging, a good shooter could consistently hit a deer-size kill zone at 100 yards. If you don’t put in the time to practice at those ranges, keep your shots to a maximum of 50-75 yards.

What is the most powerful shotgun slug?

The Brenneke Magnum Crush is their most powerful cartridge and is only available in 12 gauge 3″ chambering. The projectile features the Brenneke sliding rear that slams into the front section on impact.

How accurate is a slug shotgun?

Your expected range of accuracy for any box of slugs you grab in a store should be about 50 yards. A saboted slug maintains accuracy at a longer range–120 yards is not too much to ask from a finely tuned slug gun with a rifled barrel and scope, and some deer hunters feel confident out to 150 yards.

How big is a 10 gauge slug?

Specs

Gauge 10 Gauge
Muzzle Velocity 1280
Type Lead
Shot Charge Oz 1 3/4
Shotshell Length 3-1/2in. / 89mm

What distance should I zero my shotgun?

50 yards
Most slugs become subsonic, travelling less than 1220 feet per second, slightly beyond a muzzle distance of 50 yards, thus making 50 yards the ideal zeroing distance. Zeroing at 50 yards also cuts down, by approximately 60%, the chance of adjusting Windage error into your scope setting.

What are the ballistic characteristics of a sabot slug?

Since slugs and sabot projectiles are single solid projectiles, their ballistic characteristics are very similar to the pistol and rifle projectiles covered in the Ballistics Series. Therefore, I will focus the majority of this article on buckshot and birdshot.

What kind of steel is used to test shotgun slugs?

To illustrate the penetration potential of shotgun slugs, the test was carried out using standard NATO 0.138″ steel test plates. Buckshot loads are shown for comparison purposes. The common misconception is that the shotgun slug has an extremely short range as well as a very poor trajectory.

What’s the minimum penetration of a shotgun slug?

It is generally accepted by those involved in the wound ballistics field that a minimum penetration of 12 in. of 10% ordnance gelatin is one of the criteria needed to provide reliable incapacitation of a human assailant. A comparison of shotgun pellet and solid slug penetration in 10% ordinance gelatine.

Is there a federal ballistics calculator you can use?

Ballistics Calculator The Federal Ballistics Calculator lets you quickly determine the trajectory for any rifle or handgun load, and save data for an unlimited number of loads.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top