How do I change programs in Hunter Pro C?

How do I change programs in Hunter Pro C?

Length:

1. Start with the dial in the RUN position.
2. Press and hold the button. Turn the dial to the WATER DAYS position.
3. Release the button.
4. Use the and button to change program modes.

How do you adjust Hunter Pro C sprinkler heads?

Insert the plastic key end of the Hunter wrench into the adjustment socket . While holding the nozzle turret at the right stop, turn the wrench clockwise. Each full 360° turn of the wrench will increase the arc 90°. Adjust to any arc between 40° and 360°.

How do you troubleshoot Hunter Pro C sprinkler system?

Solution

1. Make sure sensor is micro-switch type such as Mini-Clik®. Check that the jumper has been removed from the SEN terminals. Confirm proper operation (see “Testing the Weather Sensor”).
2. Manual Single Station Mode will override the sensor. Use Manual All Station Mode to test sensor.

How many stations does a Hunter Pro C controller have?

Additional modules may be added in increments The Pro-C controller is designed with a simple to use Power Lock feature of 3 stations (PCM-300) or a single 9-station (PCM-900) to expand the that assures that the modules are energized and firmly secured into the controller’s station capability to 15 stations. Page 8: Connecting The Battery

How to run outdoor lighting on Hunter Pro-C?

Page 27 Using the Pro-C to Operate Outdoor Lighting (optional) Creating a Lighting Program 1. Turn the dial to the START TIMES position. 2. Press and hold the button for 6 seconds and observe the A, B, C programs moving. 3. L1 and a flashing “OFF” will appear, and the controller is ready to designate lighting programs.

What are hidden features of the Hunter Pro-C?

Hidden Features (continued) Programmable Sensor Override The Pro-C allows the user to program the controller so that the A station that is running in the sensor override mode will display sensor disables watering on only desired stations. For example, the word “SENSOR” and flash the icon.

How does pxsync work on a Hunter Pro-C?

PXSync interface box. Connect wires from the first PXSync box to station output 1 (and the Common) on the Pro-C terminal. If using a second or third transformer, the second will be wired to station 2 and the third wil be wired to station 3.