What is the difference between 6G72 and 6G74?
Respectivelly the DOCH MIVEC 6G72 models carry a 274 PS (270 HP) but at a higher rpm than the 6G74 reaches its highest output stock, DOCH non MIVEC models countering with 230 PS and 238 PS. The 6G72 is also rev happy and a fun driver with either a 5 speed automatic or manual transmission.
What cars have a 6G72 engine?
The 6G72 is a 3.0 L (2972 cc) engine….Applications:
- 1990–2001 Mitsubishi GTO (aka 3000GT)/Dodge Stealth.
- 1989–1995 Plymouth Acclaim/Dodge Spirit.
- 1987–2000 Dodge Caravan.
- 1990–1993 Dodge Ram 50.
- 1988–1989 Dodge Dynasty.
- 1988–1990 Dodge Raider.
- 1987–1995 Chrysler LeBaron.
- 1989–1991 Chrysler TC by Maserati.
What is Mivec?
MIVEC is a type of VVT engine technology developed by Mitsubishi Motors and it is used on all Mitsubishi engines. MIVEC controls the frequency a valve lift event occurs and the timing of air flow intake and exhaust and it increases power and torque output over a range of various engine speeds.
Is the Mitsubishi 3.0 V6 a good engine?
The most often-heard complaint about this engine is not that it seems to fail, but that it leaks and/or consumes oil. Engine life seems to be good, with many of these motors reaching 200,000 to 300,000 miles. The oil leaks and consumption problems can be traced to several causes.
Is the Mitsubishi 3.8 an interference engine?
{33} On 1994 & prior models, replace every 60,000 miles. On 1995-2007 models, replace every 60,000 miles is recommended. On 2008-10 models, replace every 105,000 miles. {72} Normal Service, replace every 60,000 miles….
| Interference/non-interference | |
|---|---|
| 1.5L | Interference |
| 3.8L | Interference |
Did Mitsubishi make a V8?
The Mitsubishi 8A8 engine is a range of V8 powerplants produced by Mitsubishi Motors since 1999.
Is the Mitsubishi 6G72 a good engine?
The 6G72 engine is a powerful six-cylinder power unit that appeared in 1986 and was able to hold out on the assembly line until 2008. This engine has proven itself to be extremely reliable, economical and easy to maintain.
Is MIVEC like VTEC?
All forms of old Vtec (starting in 1989) from the NSX to the B16 to the S2000 have 3 cam profiles. It works exactly like the pre-04 MIVEC. The only exception is the civic Vtec-E (economy 1.5l) which is a two lobe system.
Is MIVEC a CVT?
Newest developments have led to MIVEC system being evolved into a continuous variable valve timing and also being the first VVT system to be used into a passenger car diesel engine.
What is Mitsubishi Cyclone Engine?
The 6G7 series or Cyclone V6 engine is a series of V6 piston engines from Mitsubishi Motors. The staple of their high-end sedans, it was given twin-turbos for the Mitsubishi GTO, and became the most powerful car ever built by the company at the time.
Is the 6G74 an interference engine?
Diesel engines were not an option, even in Canada. They continued to be sold beyond 2004 (unlike the US) and were available with the 2.4L 4G69 I4, 3.0L 6G72 V6, and 3.5L 6G74 V6, all of which are petrol. All three engines are interference engines with the 3.0 and 3.5 being 24-valve and the 2.4L being a 16-valve engine.
Is the Mitsubishi 2.4 an interference engine?
“The DOHC and SOHC 16V 4G64 are interference engines, while the SOHC 8V 4G64 is a non interference engine.”
What kind of engine does a Mitsubishi 6G74 have?
The 6G74 is a 24-valve unit available with either SOHC, DOHC, or MIVEC DOHC.
What’s the CFM on a Mitsubishi 6G75 MIVEC?
The 3000GT Vr-4 trans has alignment issues with the oil filter housing and the axle on the 6G75 engine. Along with if rotated, none of the engine mounts line up anymore. As far as the cylinder head goes, the 6G75 MIVEC flows about 277 CFM on the intake and 179 CFM on Exhaust. Cylinder 2 shows a port and polish job on this same head.
Is there a 6G74 DOHC MIVEC cam belt?
This type of engine can be recreated using other 6g7 engines for example – 3rd gen 6g74/5 block with 6g72 dohc mivec heads using a oem 6g74 dohc mivec cam belt.. I have found here and willing to get it next week, the Pajero Evolution engine, 6G74 DOHC Mivec engine.
Is the 6G74 and 6g75m MIVEC heads the same?
The 6G74 and the 6G75M injectors you have pictured above have the same flow rate. You can also exchange the injectors between the two without any adverse effect. There’s also a second variation of the 75 mivec heads with only the one mivec control valve mounted on the rear head with a feed line crossing over to the front.