How do I clear the Replace drum message on Brother printer?

How do I clear the Replace drum message on Brother printer?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

1. Make sure that the machine is turned on.
2. Open the front cover.
3. Press and hold OK for 2 seconds.
4. Press the Up arrow key or 1 to reset the drum counter.
5. Close the front cover.

Why does my Brother printer keep telling me to replace the drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you fix a brother drum error?

Drum Error (Drum!)

1. The corona wires have become dirty. Clean the corona wires in the drum unit.
2. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly.
3. If the issue still continues, the drum unit is at the end of its life.

How do I clear the message drum Error Slide the Green tab?

How to clear error message “Slide the Green tab on Drum Unit”?

1. Take out the drum unit and toner assembly.
2. Clean the electrodes with a soft cloth.
3. Gently slide the green tab from side to side several times, and return it to the home position at the far left.
4. Re-install the drum unit.

How do you reset the drum on a Brother MFC l2710dw?

Reset the Drum Counter

1. Make sure the machine is turned on.
2. Close the front cover.
3. Press OK and the Up arrow key at the same time.
4. Press OK to select Drum.
5. Press the Up arrow key to reset the drum counter.

How do you reset the drum on a Brother printer mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

How do I reset my brother drum?

Reset the Drum Counter

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information => Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

Why does my Brother printer keep saying Slide the green tab?

The message ‘Drum Error, Slide the Green Tab on the Drum Unit’ will appear when the corona wire on the drum unit needs to be cleaned. 1. Clean the corona wire inside the drum unit for all four colors.

How do I fix the drum error on my Brother MFC 9840CDW?

How to reset the MFC-9840CDW printer when the drum has expired:

1. In ready mode, press the 3 and 9 button at the same time so that the reset menu appears.
2. Press the up or down arrow until you get to the drum, then press ok.
3. Select 1 to reset the drum.
4. Your printer should now be in the ready state with the drum reset.

How do I reset my Brother MFC drum?

How do you change the drum on a brother mfc 7360n?

How to replace the drum

1. Turn on the printer.
2. Open the front cover and let the printer sit for ten minutes so it can cool down.
3. Remove the drum unit and toner cartridge from the printer.
4. Separate the toner cartridge from the drum unit by pressing down on the green lever.
5. Open up your new drum unit.