How do you reset Trident?

How do you reset Trident?

Reset Reagent Levels

1. Click on the configuration gear on the Trident.
2. Select “Configure Trident”
3. Select “Reset”
4. Select “Reagent A” and “Waste”
5. Send the Update to Apex Fusion.

How do I reset my Neptune Trident?

Thread: Apex Neptune factory reset. Is there a way to bring this thing back to factory default? Press and hold the reset button for 20 or more seconds.

How do you clear waste full Trident?

Click your Trident dashboard tile until it shows you the Waste stats. If it still shows it full, then click the Trident’s gear icon, under Configure click Trident, on the configuration screen select Waste from the Reset dropdown, then save the changes.

How do you change the reagent in Trident?

Run Reagent Replacement Task

1. Select the task icon in Apex Fusion.
2. Scroll down to Trident Reagent Replacement.
3. Select Trident Reagent Replacement.
4. Run through onscreen prompts and instructions to replace the reagents.

How do I reset my Neptune Apex Controller?

Reset

1. To reboot the Apex controller press the button quickly.
2. To put the Apex into WiFi access mode press and hold the reset button until the status LED changes to BLUE (about 6 seconds), then release the reset button.

How long does Trident take to initialize?

Upon connection the Trident status LED panel will turn blue, indicating that it is initializing. The initialization will take 2-4 minutes to complete.

How do you use Trident calibration solution?

Enter the Calibration Value On the outside of the calibration bottle there is a label indicating the parameters of the calibration solution. Enter those values into Apex Fusion: The Trident will then turn blue indicating the calibration has begun. The calibration itself will take approximately an hour or more.

How long does Trident take to test?

The tests perfomed by the Trident are incredible precise, they are done with a precision of +/- 0.05 dKh for Alkalinity and 15ppm for Calcium and Magnesium. The Trident is easily set up, from unpacking the box to using the Trident can be done in under 10 minutes!

How do I reset my Neptune Classic apex?

Well-Known Member

1. If you wish start go to your Display Module and go to SYSTEM> INIT MEMORY> INIT ALL> YES.
2. Everything will turn blinking orange.
3. Wait 5 minutes.
4. Check all your Apex Equipment everything should turn to back green status.
5. Make sure the internet connection cable is secure and connected.

How do you set up Trident?

Set Waste Size Container

1. Click on the configuration button (the button with 3 gears)
2. Select the Module icon.
3. Select the Trident.
4. Select Container or Drain.
5. If you selected Container, enter the capacity of your waste container in milliliters.
6. Update to the cloud.

How often do you calibrate Trident?

every 2-month
With every 2-month reagent package is a calibration standard. In every 2-month package Neptune Systems guarantees the reagents are from the same “batch.” The calibration standard allows your Trident to calibrate to that batch.